Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2021 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
21b
Advertisement
Related Manuals for Harbor Freight Tools CentralPneumatic 60801
Summary of Contents for Harbor Freight Tools CentralPneumatic 60801
- Page 1 No portion of this manual or any artwork contained herein may be reproduced in Failure to do so can result in serious injury. any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing SAVE THIS MANUAL.
-
Page 2: Table Of Contents
table of contents Safety ............2 Maintenance ..........10 Specifications ..........6 Parts List and Diagram ......11 Setup ............7 Warranty ............ 12 Operation ............ 8 WarninG SyMBOLS anD DEFinitiOnS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. - Page 3 personal Safety 1. Stay alert. Watch what you are doing and 4. Do not overreach. use common sense when operating the tool. Keep proper footing and balance at all times. Do not use the tool while tired or under the Proper footing and balance enables better influence of drugs, alcohol, or medication.
- Page 4 air Source 2. Never use oxygen, carbon dioxide, combustible never connect to an air source gases or any bottled gas as an air source that is capable of exceeding for the tool. Such gases are capable of 200 psi. Over pressurizing the explosion and serious injury to persons.
- Page 5 Silicosis and aluminum Oxide Warnings WarninG! Abrasive blasting with sand containing 3. Use containment methods such as blast-cleaning crystalline silica can cause serious or fatal respiratory machines and cabinets to control the hazard disease. Exposure to crystalline silica may cause and protect adjacent workers from exposure.
-
Page 6: Safety
FunctiOnaL DEScriptiOn Specifications itEM 60801 60802 Maximum Air Pressure 90 PSI Air Inlet 1/4″ -18 NPT Average Air Consumption 8.5 CFM @ 90 PSI 7 CFM @ 90 PSI Abrasive Capacity 40 lb. 15 lb. Abrasive Type Sodium Bicarbonate media only components and controls Media Valve... - Page 7 initiaL SODa BLaStEr SEt up/aSSEMBLy read the EntirE iMpOrtant SaFEty inFOrMatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.
- Page 8 OpEratinG inStructiOnS read the EntirE iMpOrtant SaFEty inFOrMatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. inspect Soda Blaster before use, looking for damaged, loose, and missing parts. if any problems are found, do not use Soda Blaster until repaired.
-
Page 9: Setup
Workpiece and Work area Set up 1. Designate a work area that is clean and well-lit. 3. Secure loose workpieces using a vise or clamps The work area must not allow access by children (not included) to prevent movement while working. or pets to prevent distraction and injury. - Page 10 uSEr-MaintEnancE inStructiOnS procedures not specifically explained in this manual must be performed only by a qualified technician. tO prEVEnt SEriOuS inJury FrOM acciDEntaL OpEratiOn: turn off the Soda Blaster, detach the air supply, safely discharge any residual air pressure in the Soda Blaster, and release the throttle and/or turn the switch to its off position before performing any inspection, maintenance, or cleaning procedures.
-
Page 11: Parts List And Diagram
partS LiSt anD DiaGraM pLEaSE rEaD tHE FOLLOWinG carEFuLLy THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. -
Page 12: Warranty
LiMitED 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.