Connecting Water Hose To The Product; Connecting To Water Mains - Beko GN163120X User Manual

Hide thumbs Also See for GN163120X:

Table of Contents

Available languages

Installation

3.6. Connecting water

hose to the product

To connect the water hose to the product,

follow the instructions below.

1. Remove the connector on the hose nozzle

adaptor in the back of the product and run the

hose through the connector.

2. Push the water hose down tightly and connect

to the hose nozzle adaptor.

3. Tighten the connector manually to fix on the

hose nozzle adaptor. You may also tighten the

connector using a pipe wrench or pliers.

4. Connect the other end of the hose to the

water mains (See Section 3.7) or, to use

carboy, to the water pump (See Section 3.8).

Refrigerator / User Guide

To use the product by connecting to the cold water

mains, a standard 1/2" valve connector must be

installed to the cold water mains in your home. If

the connector is not available or if you are unsure,

consult a qualified plumber.

1. Detach the connector (1) from the faucet

adaptor (2).

2. Connect the faucet adaptor to the water mains

3. Attach the connector around the water hose.

Chapters

Table of Contents

Gn163220x Gn163130x Gn163120s