Table of Contents
Advertisement
Available languages
Available languages
Installation Instructions CP 1411
1
Description of the CP 1411
1.1
General Description
Hardware
The CP 1411 is a card for IBM-AT compatible PCs or PGs and re-
quires a 16-bit ISA slot for operation.
Requirements
Ethernet
The CP 1411 is intended for operation in networks handling communi-
cation using the CSMA/CD medium access technique (Ethernet).
Connections
The CP 1411 is connected to the LAN (Local Area Network) using one
of the two female connectors on the front panel of the CP.
LED Display
To indicate module activity, the CP 1411 has an LED on its front panel
that lights up when data is received.
1.2
Network Attachments
15-pin sub D
The 15-pin sub-D female connector with its slide locking mechanism is
intended both for connection of AUI transceiver cables (AUI Attach-
female connector
ment Unit Interface) as well as ITP cables (ITP - Industrial Twisted
Pair).
Switching between
If you use Siemens ITP cables, the module switches over between AUI
and ITP automatically.
AUI and ITP
RJ-45 Female
The RJ-45 connector is designed for the attachment of TP cables
Connector
(TP - Twisted Pair).
Caution in an
In an industrial environment, only the AUI or ITP connectors should be
used due to their superior noise immunity.
Industrial
Environment
Note that it is not possible to use both connectors at the same
time.
30
All manuals and user guides at all-guides.com
Installationsanleitung CP 1411
C79000-Z8974-C24-05
Advertisement
Chapters
Table of Contents
