Table of Contents
Advertisement
Heating with multiple cooking stages
For best results, some microwave recipes call for different
power levels or different lengths of time for cooking. Your
microwave may be set to change from one stage to another
automatically (2 stages maximum).
Example: to cook food at 80%power for 3 minutes and
then 50% power for 6 minutes 30 seconds:
1. Press Power Level pad.
2. Use the number pads to enter power level
for the 1st stage. PL8 appears in the
display (80% power).
3. Use the number pads to enter heating
time for the 1st stage (cook time may be
set up to 99 minutes and 99 seconds).
4. Press START/+30 sec pad.
5.
Press
Power Level (within 1 second) for the
2nd stage.
6.
Use the number pads to enter power level
for the 2nd stage. PL5 appears in the
display (50% power).
7.
Use the number pads to enter heating
time for the 2nd stage (cook time may be
set up to 99 minutes and 99 seconds).
8. Press START/+30 sec pad.
When finished, you will hear a series of beeps.
NOTE:
1. The "Convenience operation" can't be set as one of
multiple cooking.
2. If the 1st stage is the set defrost feature, the 2nd stage
can't be set to Defrost again. If one of the stages is
weight defrost, that will be the 1st stage when cooking
starts.
Manual Operation
Adding cook time (+30sec)
Pressing the START/+30sec pad once starts 30 seconds of
cooking at a 100% power level.
Pressing the START/+30sec pad during cooking adds 30
seconds (for each press) to the cook time..
POWER
1. Press START/+30sec pad 2 times.
LEVEL
NOTE: The "+30sec" function is not available when using
the "weight defrost" or any of the "convenience
operation" features.
Setting Defrost by Weight
Example: to defrost 0.5 lbs. of food using the automatic
defrost cycle (cook time determined automatically)
1. Press Defrost pad
2. Press 2.
POWER
LEVEL
3. Use the number pads to enter weight of
food to defrost in pounds. You may enter
weight from 0.5 to 7.0 pounds.
4. Press START/+30sec pad.
When defrosting has finished, you will hear a series of
beeps.
NOTE: The weight amount must be a valid entry for this
feature to start. A valid weight entry is 0.5 to 7.0 pounds A
decimal point is assumed before the last digit you enter.
For example, enter 0, 5 for 0.5 pounds and enter 5 for 5.0
pounds.
Setting Defrost by Time
Example: to defrost food with the automatic defrost
cycle for 5 minutes:
1. Press Defrost pad
2. Press 1.
3. Use the number pads to enter desired
defrost time (defrost time may be set up to
99 minutes and 99 seconds).
4. Press START/+30sec pad.
When defrost has finished, you will hear a series of beeps.
10
Hide quick links:
Advertisement
Table of Contents
