Table of Contents
Advertisement
The next steps illustrate the removal of power cable from connector J60, 51, 64 and 82.
Squeeze on the top of the retaining latch attached to the cable end of the connector.
1.
Grasp the cable end of the connector and pull it straight up.
2.
CAUTION: Always pull the connector—NEVER pull on the cable. Pulling on the cable could damage
the cable and result in a failed power supply.
Figure 3 Unplugging Power Cable
Cable connections
The following tables provide information about switching power supply cable connector labels.
Table 12
Cable Connections from the 460 W Power Supply
Cable
Switching power supply
Switching power supply
Switching power supply
Switching power supply
Switching power supply
Switching power supply
Switching power supply
Switching power supply
To
System board 24-pin power connector
System board 8-pin power connector
System board 4-pin power connector
4/8 HDD backplane
12/25 HDD backplane
12 HDD backplane and 2 HDD
backplane
System board backplane power
connector
Front optical disk drive or rear optical
disk drive
Cable Designator
P1
P2
P3
P4
P4 and P5
P5 extended connectors, the two
short cable connectors to 12HDD
backplane, the long cable
connector to 2HDD backplane
RPS
CD
Removal and replacement procedures 45
Advertisement
Table of Contents
