Advertisement
SPECIFICA TIONS
Item
Description
Standard
Vickers Transmission
Charge Relief Setting
Implement Charge Relief Setting
Traction Pressure
25-50 psi (127-345 kPa) @ 3200 rpm
450-500 psi (3103-3448 kPa) @ 3200 rpm
3000-3500 psi (20685-24133 kPa) @ 3200
rpm
3200 ::t 100 rpm
0
-
3200 rpm
Pump Input Speed (maximum)
Motor Output Speed
Sundstrand
Transmission
Pump Displacement
12.6 gal/min (47.9Umin) at 3200 rpm
IPump Input Speed (maximum)
Motor Displacement
Motor Output Speed
Max. Operating Pressure
Charge Pump Displacement
Charge Relief Setting
Max. Inlet Vacuum
Max. Case Pressure
Implement Relief Setting
3200
:!:
100 rpm
12.6 gal/min (47.9Umin) at 3200 rpm
0 - 3200 rpm
3000 psi (20685 kPa)
4.6 gal/min (17.3L/min) @ 3200 rpm
70-150 psi (453-1034 kPa)
5 in.hg. (16.9 kPa)
15 psi (103 kPa)
700-800 psi (4826-5516 kPa) at 3200 rpm
Hydraulic Oil
Sundstrand:
Above 0 of (-18C)
Below O°F (-18C)
Use API class SE-SF 10W30 or 10W40
Use API class SE-SF 5W20 or 5W30 or
Type A, Suffix A Automatic Transmission
Fluid-Do
Not Use "Dexron" fluid
Vickers:
All Temperatures
Use API class SE-SF 10W40
Lift Control Valve
Four way, four position, directional
control
Open center
Lift Cylinder
2.50
II
(6.35cm) bore
3.25" (8.26cm) stroke
Lower tank of radiator
Oil Cooler
Reservoir
Differential Housing
5 Qt. (4.7L) Capacity
Oil Filter
10 micron screw-on type
Vickers
application (Toro
PIN 353-435)
Sundstrand application (Toro
PIN 23-2300)
25 micron screw-on type
5.2
Advertisement
