Converting Scsi Configuration From Simplex To Duplex; Safety Information; Service Tools Required; Accessing A Rack Mounted Server - HP Integrity rx4640 Upgrade Manual

Hide thumbs Also See for Integrity rx4640:

Table of Contents

Converting SCSI Configuration from

Simplex to Duplex

Follow the procedures listed below to ensure safe handling of components and to prevent harm to both you

and the HP Server:

•

Use an antistatic wrist strap and a grounding mat, such as those included in the Electrically Conductive

Field Service Grounding Kit (HP 9300-1155).

•

Handle accessory boards and components by the edges only. Do not touch any metal-edge connectors or

any electrical components on accessory boards.

•

Do not wear clothing subject to static charge build-up, such as wool or synthetic materials.

WARNING

Hazardous voltages are present inside the HP Server. Always remove AC power

from the server and associated assemblies while working inside the unit. Serious

injury may result if this warning is not observed.

Service of this product may require one or more of the following tools:

•

Electrically Conductive Field Service Kit (P/N 9300-1155)

•

1/4 inch Flat Blade Screwdriver

•

ACX-15 Torx® Screwdriver

The hp Integrity rx4640 server is designed to be rack mounted. The following procedure explains how to gain

access to an hp Integrity rx4640 server that is mounted in an approved rack. For rack installation

instructions, review the document titled hp Integrity rx4640 Server Rack Installation Guide.

WARNING

Ensure that all anti-tip features (front and rear anti-tip feet installed; adequate

ballast properly placed, etc.) are employed prior to extending the server.

Chapter 2

Table of Contents