Toro Reelmaster 5610 Operator's Manual page 14
Traction unit
Hide thumbs
Also See for Reelmaster 5610:
- Owner's/operator's manual (56 pages) ,
- Service manual (662 pages) ,
- Operator's manual (60 pages)
Table of Contents
Advertisement
Figure 13
1. Hairpin
2.
Remove the 2 flange locknuts (3/8 inch) and 2
carriage bolts (3/8 x 1-1/4 inches) that secure
the turf-compensator bracket to the cutting-unit
frame
(Figure
14).
Figure 14
1. Carriage bolt (3/8 x 1-1/4
inches)
2. Turf-compensator bracket
3.
Align the studs of the right hose guide with
the holes in the cutting-unit frame and the
turf-compensator bracket
Note:
Ensure that the support loop of the
hose guide aligns toward the centerline of the
machine.
g375689
g375690
3. Flange locknut (3/8 inch)
(Figure
15).
1. Stud (hose guide )
2. Turf-compensator bracket
4.
Assemble the hose guide and turf-compensator
bracket to the cutting-unit frame with the 2 flange
locknuts (3/8 inch).
5.
Torque the locknuts to 37 to 45 N∙m (27 to 33
ft-lb).
Positioning the Turf Compensating
Spring
Cutting Unit 2
1. Cutting unit 1
2. Cutting unit 2
3. Cutting unit 3
4. Cutting unit 4
1.
If the hairpin is installed in the rear hole of the
compensation-spring rod—remove the hairpin
and insert it in the hole next to the bracket
(Figure
17).
14
Figure 15
3. Flange locknut (3/8 inch)
4. Inboard
Figure 16
5. Cutting unit 5
6. Reel motor
7. Weight
g375688
g379514
Advertisement
Table of Contents
