Table of Contents
Advertisement
Command:
Output:
5.1.4 Incorrect instruction / error codes
If a command is not entered correctly, the reader sends one of the following error codes:
ERROR CODE
NAK #00 <CR>
NAK #02 <CR>
NAK #03 <CR>
NAK #04 <CR>
NAK #05 <CR>
NAK #06 <CR>
NAK #08 <CR>
NAK #10 <CR>
NAK #11 <CR>
NAK #12 <CR>
NAK #13 <CR>
NAK #14 <CR>
NAK #15 <CR>
NAK #16 <CR>
NAK #17 <CR>
NAK #18 <CR>
NAK #19 <CR>
NAK #20 <CR>
NAK #21 <CR>
NAK #22 <CR>
NAK #23 <CR>
NAK #24 <CR>
NAK #25 <CR>
NAK #26 <CR>
NAK #40 <CR>
--------------------------------------------------------------------------------17/50--------------------------------------------------------------------------------
<CR>
<CR>
MEANING
unknown command
wrong parameter
EEPROM error
wrong transponder type/command not available
buffer overflow
not logged in
wrong password
antenna failure
anticollision error level 1
anticollision error level 2
select error level 1
select error level 2
transceiver IC error
not acknowlegde
no valid value block
EEPROM full
code already saved in EEPROM
Decoder communication error
wrong standard
wrong transpondercode length
transpondercode length and transponder don't match
data is not multiple of the block size
data length shorter than block size
no communication to AMP
ISO 15693 error 01h: command not supported
Advertisement
Table of Contents
