Introduction Table of contents Introduction Caution for safety ... 4 About this product ... 5 Compatible discs ... 6 Index to parts and controls ... 12 ... 12 Front panel ... 14 Rear panel ... 16 Remote control Display ... 18 Before operating this recorder ...
Page 3
Dubbing selected Items (Dubbing specified parts together) ... 108 Rate conversion dubbing (Dubbing at a modified bit rate) ... 112 Line-U dubbing (Recording pictures while viewing them) ... 116 Deleting selected items (Deleting multiple specified parts) ... 118 Combine Original titles (Combine two titles into one) ...
Introduction Introduction Caution for safety Read “SAFETY PRECAUTIONS”, “IMPORTANT SAFETY INSTRUCTIONS”, “Precautions” and others of the “INSTALLATION GUIDE” first.
Introduction About this product Some differences This DVD recorder is more similar to a computer than it is to a standard DVD player. In addition to a microprocessor, it contains a hard disc drive (an HDD), an operating system, random access memory (RAM), and a DVD-RAM/R/RW drive.
• Depending on the data recording method or the disc status, playback or recording on this recorder may not be possible, even if the disc is labeled as below. Toshiba cannot assure that all discs bearing the DVD or CD logos will operate as expected.
Page 7
• There may be some DVD discs designed for this market that cannot be played on this recorder. If you encounter please contact TOSHIBA customer service. • Toshiba cannot assure that all discs bearing the DVD or CD logos will operate as expected. Please see the discussion of compatibility on page 5.
Page 8
Introduction Compatible discs (Continued) On DVD-RAM discs Use only DVD-RAM discs that comply with DVD- RAM standard Version 2.0 or 2.1. The recorder cannot record on a disc formatted in any other standard. When using such a disc, initialize it by using the disc-format function of this recorder.
Page 9
On DVD-R discs Standards DVD-R for General Ver.2.0 discs can be used for recording and playback. Discs compatible with 2X speed recording (labeled Ver.2.1/2X etc.) and discs compatible with 4X speed recording (labeled Ver.2.1/4X etc.) can also be used. Select discs labeled “for video,” “for recording,” “120 min.”...
Introduction Compatible discs (Continued) Structure of disc contents Normally, DVD video discs are divided into titles, and the titles are subdivided into chapters. VIDEO CDs/audio CDs are divided into tracks. DVD video disc Title 1 Chapter 1 Chapter 2 Chapter 1 Chapter 2 Chapter 3 VIDEO CD / audio CD Track 1 Track 2...
Page 11
Discs and purposes The table shows main functions which are available on this recorder per disc category. This will help you choose discs. DVD-RAM disc Suitable for repeat use of the Characteristics on this disc, and data storage for recorder video library.
Introduction Index to Parts and Controls See pages with arrows for details. Front panel Front panel 12 13 16 17 * The above illustration displays the front panel with the cover open. See the following page on how to open or close the cover. 1 ON/STANDBY button pages 20, 21 Turns the power on/restores the unit in the...
Page 13
16 Three mode indicator page 32, 55, 60, 62, 63 Indicates the selection by the three mode button. 17 Media indicator Indicates the current media. 18 Operation Status Indicator (HDD) Indicates the operation status of the HDD. : Recording : Playing : Copying within the disc 19 HDD indicator Illuminates in the HDD mode.
Introduction Index to Parts and Controls (Continued) Rear Panel 1 AC IN socket page 15 in “INSTALLATION GUIDE” Connects to the supplied power cord. 2 Ventilation fan 3 RF IN (FROM ANT.) input socket “INSTALLATION GUIDE” Connects to an aerial or satellite signal. 4 RF OUT (TO TV) output socket “INSTALLATION GUIDE”...
Page 15
10 DIGITAL BITSTREAM/PCM OPTICAL AUDIO OUTPUT jack page 22, 23, 24 in “INSTALLATION GUIDE” Use this to connect the recorder to an audio receiver equipped with an optical digital audio input jack. When connecting the optical digital cable, remove the cap and fit the connector into the jack firmly.
Introduction Index to Parts and Controls (Continued) Remote control OPEN/CLOSE TOP MENU MENU RETURN ANGLE SUBTITLE AUDIO CHANNEL TIMESLIP INSTANT REPLAY EASY NAVI REC MENU EDIT MENU LIBRARY ENTER PAUSE STOP REMAIN DISPLAY TIME BAR CHP DIVIDE DIMMER FL SELECT ZOOM TV/VIDEO CHANNEL VOLUME SAT.CONT.
Introduction Index to Parts and Controls (Continued) Display 1 DUBBING indicator Illuminates when copying. 2 PBC indicator Illuminates when PBC function is “On” ( 156) and a PBC-controllable VIDEO CD is loaded. 3 Angle icon page 70 Illuminates when playing a scene recorded with multi angles.
Page 19
Dimming the display Pressing the DIMMER button on the remote control changes the brightness of the display (normal/dimmed/off). Switching the display Every time you press the FL SELECT button, the display changes between the channel, title number, and time. The display may not change, depending on the disc or recording conditions. 15 Channel indicator Displays the current channel or other numbers such as a title number, track number, bit rate or...
Introduction Before operating this recorder Is your recorder ready? • Refer to the supplied “INSTALLATION GUIDE” manual and finish the necessary preparations. • Turn on the connected equipment such as a TV or audio system and select the input from the recorder. Turning the power on (This owner’s manual instructions are based on the assumption that all proper connections have...
Page 21
OPEN/ CLOSE button on the remote control. This may turn the recorder on and open the disc tray. If it still won’t open, contact your nearest TOSHIBA dealer. Turning the power off Press ON/STANDBY on the front panel of the recorder or on the remote control.
Page 22
Introduction Before operating this recorder (Continued) Start-up/Shutdown (closing) icons These icons are displayed at the top right corner of the screen when startup or finishing. While they are flashing, the recorder is operating as follows: Start-up, reading a disc, finishing the recording Loading Unloading a disc, finishing the...
Introduction Key operation The EASY NAVI button opens the “EASY NAVI Main Menu”, a main gate to the functions of this recorder. From this menu, you can access the desired functions while viewing a current picture. Additionally, the QUICK MENU button provides you a sub-menu of the current function. EASY NAVI Press EASY NAVI.
Page 24
Introduction Key operation - EASY NAVI & QUICK MENU (continued) To exit the EASY NAVI Press EASY NAVI again. Note • For a disc other than the specified one, the finder cannot be operated. To play the disc, exit the EASY NAVI then press the PLAY button, or select the “Play Contents”...
Hint on reading this manual The following icons show the playable discs for each function described on this instruction manual. : HDD DVD-RAM : DVD-RAM disc DVD-RW : DVD-RW disc DVD-R : DVD-R disc DVD-VIDEO : DVD video disc : VIDEO CD : Audio CD (For CD containing JPEG or MP3/WMA files, page 76, 78.)
Recording Before recording Please be sure to read this critical background information prior to making a recording. This recorder is equipped with a built-in HDD. Conventional video cassette recorders have required tapes to record, while this recorder enables recording on the HDD whenever you want, without selecting an available tape or confirming its recording time or tape remaining.
Page 27
Note on recording on a DVD-R disc Confirm disc compatibility and prepare an available DVD-R disc to record on ( page 6, 9). To play a DVD-R disc recorded on this recorder on other devices, finalize the DVD-R disc on this recorder.
Recording Before recording (Continued) Initializing a DVD-RAM/RW disc (Logical Format) Be sure to read this section prior to using a DVD-RAM/RW disc on this recorder for the first time. For DVD-R, initializing is not necessary. A disc should be initialized in the following cases: (The recorder may display a message to request you to do so.) e.g.
4) Press to select “Start,” then press ENTER. e.g. DVD format Entire disc contents excluding library data will be erased if disc is formatted. Proceed? Start Cancel Format 5) Press to select “Start,” then press ENTER. Initialization starts. e.g. DVD format Formatting Format When initialization is completed, the setup window...
Recording Before recording (Continued) Entering characters e.g. CONTENT Title information MENU Cursor An entered character will appear here. Chapter Language English Spanish French German Italian etc... Select Cursor Operation guidance of the remote control To enter the character, normally use the direction buttons on the remote.
Page 31
Entering characters The cursor may be followed by unwanted characters. You can erase them if necessary by either of the following measures: Erasing characters • Erasing all the characters on the writing board Select “Clear All” by pressing the then press the ENTER button. Alternatively, open the lid of the remote control and press the CLEAR button.
Recording DVD-RAM DVD-RW DVD-R Recording a TV programme To record a TV programme currently being broadcast, follow the procedures of this chapter. Preparation • When you record on a DVD-RAM/R/RW disc, load it into the recorder. - Load a disc which has sufficient space available to record the programme. - Make sure the loaded disc is not write-protected.
Page 33
OPEN/CLOSE TOP MENU MENU RETURN ANGLE SUBTITLE AUDIO CHANNEL TIMESLIP INSTANT REPLAY INSTANT SKIP EASY NAVI REC MENU EDIT MENU LIBRARY CONTENT MENU ENTER PAUSE STOP PLAY QUICK MENU VIDEO Plus+ EXTEND REC MODE TV CODE T.SEARCH CLEAR DELETE SETUP ENTER Open the lid.
Page 34
Recording Recording a TV programme (Continued) TIMESLIP INSTANT REPLAY INSTANT SKIP EASY NAVI REC MENU EDIT MENU LIBRARY CONTENT MENU ENTER PAUSE STOP PLAY QUICK MENU Selecting the recording mode Before recording, you can select the setting of picture and sound quality. During stop mode, press the REC MODE button.
Page 35
To stop recording Press STOP. To pause recording (to omit an unnecessary portion) During recording, press PAUSE. To resume recording, press it again. Note • Pausing recording automatically creates a new chapter division at that point. To change a TV channel to be recorded 1) During recording, press PAUSE.
Page 36
Recording Recording a TV programme (Continued) To play a recorded title while recording another on the same disc (Recorded Title Play) DVD-RAM During recording, you can play a title recorded on the same disc. 1) While recording, press CONTENT MENU. 2) Press to select a desired title, then press the ENTER.
Recording DVD-RAM DVD-RW DVD-R Recording an external source You can record programmes from connected equipment on the HDD or a DVD-RAM/R/RW disc. Connect according to A or B. For recording from a digital video camera recorder, etc. connected to the DV input terminal on the front panel, see page 136, “DV recording.”...
Recording Recording an external source (Continued) OPEN/CLOSE TOP MENU MENU RETURN ANGLE SUBTITLE AUDIO CHANNEL TIMESLIP INSTANT REPLAY INSTANT SKIP EASY NAVI REC MENU EDIT MENU LIBRARY CONTENT MENU ENTER PAUSE STOP PLAY QUICK MENU DISPLAY TIME BAR CHP DIVIDE REMAIN DIMMER FL SELECT ZOOM...
Page 39
Notes on recording from a connected VCR or camcorder Check the condition of the source equipment before playing. Set the equipment in good condition, e.g. clean the head or adjust the tracking, etc. to obtain optimum playback. Bad condition may produce noises in playback. These noises may be detected as copy protection signals, resulting in stop of recording on this recorder.
Recording DVD-RAM DVD-RW DVD-R Programing a recording (REC MENU) Use the REC MENU to program a recording. It will take less time to prepare, as it provides all necessary information for recording, including estimated disc space remaining. For more information, see “Before recording” ( Be careful when you program a recording across the change-over of Daylight-saving time ( OPEN/CLOSE MENU...
Page 41
Setting items Exec 1-99, L, AV1, AV2 Specified date (from today to 2 month later) Date Every Sunday to Saturday, Monday to Thursday, Monday to Friday, Monday to Saturday, everyday. 0:00 - 23:59 Start* End* 0:00 - 23:59 Media A–B MN(Manual) Mode Auto...
Page 42
Recording Programming a recording (REC MENU) (Continued) Notes • The disc tray does not close automatically, even when the recording start time arrives. Set the recorder loaded an available DVD-RAM/R/RW disc beforehand. • It is not possible to record the same contents onto both the HDD and a DVD-RAM/RW/R disc simultaneously. •...
Page 43
Chap. mute This feature automatically creates divisions for chapters when no audio (no audible sound) portion is found. For example, when you have recorded a programme of music clips, you can use this feature to jump to the beginning of a clip during playback. It does not create completely independent chapters or automatically divide into chapters when no audio portion is found.
Page 44
Recording Programming a recording (REC MENU) (Continued) Correcting a timer program 1) Press REC MENU. The REC MENU appears. 2) Press to select a timer program you want to change, then press ENTER. 3) Press to select an item, then press ADJUST to set the item.
Page 45
5) Correct the parameters of the timer program if necessary. (Skip to step 7 if you do not need this.) You can change “Media”, “Mode”, “Rate” and “Audio”. Select an item you want to modify and press the ENTER button. The item will be ready to be altered. Press the ADJUST button to modify.
Recording DVD-RAM DVD-RW DVD-R VIDEO Plus+ Recording You can program a recording simply by entering the corresponding PlusCode Preparation • Make sure that the recorder’s clock, receiving channels and their guide channels are set correctly ( “INSTALLATION GUIDE”). • When you record on a DVD-RAM/R/RW disc, load it into the recorder. –...
Page 47
OPEN/CLOSE TOP MENU MENU RETURN ANGLE SUBTITLE AUDIO CHANNEL TIMESLIP INSTANT REPLAY INSTANT SKIP EASY NAVI REC MENU EDIT MENU LIBRARY CONTENT MENU ENTER PAUSE STOP PLAY QUICK MENU VIDEO Plus+ EXTEND REC MODE TV CODE T.SEARCH CLEAR DELETE SETUP ENTER Notes •...
Recording Others Relay recording DVD-RAM This function automatically diverts a recording to the HDD if a DVD-RAM disc is near capacity. When the remaining time of the DVD-RAM disc has reached about 10 minutes, the recorder starts recording the same content on the HDD as well as DVD-RAM.
Reservation Disc (“Lock program record”) DVD-RAM This function is convenient when you wish to record multiple serial related programs on the same disc. The disc on which you write the reservation data is called “Reservation Disc.” A Reservation Disc may contain only one reservation.
To delete recorded content DVD-RAM DVD-RW DVD-R Important note Any deleted title/chapter (original) cannot be restored. Before deleting, be sure to check contents on the disc. 1) Perform steps 1 and 2 in “Playing recorded contents (CONTENT MENU)” ( select a title (chapter). 2) Open the lid of the remote control and press the DELETE button.
Technical information About recording time The recording time of a typical VCR (Video Cassette Recorder) is determined by the length of a video tape and recording speed (SP, LP, etc.). Video tapes with various recording times are available in the market. On the other hand, the recording time of a DVD-RAM/ R/RW depends on the bit rate (Mbps: amount of data transmitted per second), which can be varied in...
Playback Play your favorite contents. Information on playback Playing recorded contents (CONTENT MENU) Playing a DVD video disc Pausing a TV broadcast to resume later Playing a TV programme currently being recorded Playing at various speeds Locating by entering the number Watching a TV broadcast in the sub window (P in P Playback) Selecting the camera angle...
Playback Information on playback The operation procedure depends on the kind of disc. See the respective pages for basic procedure to play the disc. To play contents recorded onto the HDD or DVD-RAM discs Playing recorded contents (CONTENT MENU) ( To play a DVD video disc Playing a DVD video disc ( page 60)
Playback DVD-RAM DVD-RW DVD-R Playing recorded contents (CONTENT MENU) Titles and chapters recorded on the HDD or a DVD-RAM/R/RW disc are displayed in thumbnail view, so that you can easily locate a desired one. OPEN/CLOSE TOP MENU MENU RETURN ANGLE SUBTITLE AUDIO CHANNEL TIMESLIP...
Page 56
Playback Playing recorded contents (CONTENT MENU) (Continued) To stop playback Press STOP. STOP To pause playback (still playback) Press PAUSE. PAUSE To resume normal playback, press the PLAY button or the PAUSE button. Note • Sound is muted during still mode. Resuming playback from the location last stopped (Title resume) The recorder memorizes the location you last stopped...
Page 57
Viewing the first scenes of titles (Original) (Intro scan) 1) After step 1 on page 55, press QUICK MENU. The Quick Menu appears. 2) Press to select “Special playback mode”, then press ENTER. 3) Press to select “Intro scan”, then press ENTER.
Page 58
Playback Playing recorded contents (CONTENT MENU) (Continued) Checking the background information on a selected title 1) At step 2 on page 55, select a title (chapter) then press QUICK MENU. The Quick Menu appears. 2) Press to select “Title information”, then press ENTER.
Page 59
Jumping to a specified page 1) Press CONTENT MENU. The CONTENT MENU appears. 2) Press QUICK MENU. The Quick Menu appears. 3) Press to select “Specific page jump”, then press ENTER. 4) Enter the page number you want by pressing ADJUST, or the number buttons.
Playback DVD-RW DVD-R DVD-VIDEO Playing a DVD video disc You can also play VIDEO CDs, audio CDs or finalization processed DVD-R/RW discs in the same manner. To play recorded contents, follow the instructions on Preparation • Turn on a TV or audio system and select the corresponding input source that the recorder is connected to. •...
Resuming playback from the location last stopped (Resume Play) DVD-RW DVD-R DVD-VIDEO You can resume playback from the location where you stopped. If you press the PLAY button after stopping playback, playback resumes from the location you have stopped. If you stop playback by pressing the STOP button twice, the resume playback feature will be cancelled.
Playback Pausing a TV broadcast to resume later This function enables you to pause a TV broadcast and resume viewing at a later, more convenient time, by storing the TV broadcast temporarily on the HDD. OPEN/CLOSE TOP MENU MENU RETURN ANGLE SUBTITLE AUDIO CHANNEL...
Introduction Playback DVD-RAM Playing a TV programme currently being recorded You can begin playback from the beginning of a programme currently being recorded. You will find this function of great advantage on long programmes, as you do not have to wait for the end of recording to begin playback.
Playback DVD-RAM DVD-RW DVD-R DVD-VIDEO Playing at various speeds Playing in fast reverse or fast forward TIMESLIP INSTANT REPLAY INSTANT SKIP EASY NAVI REC MENU EDIT MENU LIBRARY CONTENT MENU ENTER PAUSE STOP PLAY QUICK MENU PLAY INSTANT REPLAY INSTANT SKIP REMAIN DISPLAY TIME BAR CHP DIVIDE...
Skipping to the next/previous chapter or track NAVI REC MENU EDIT MENU LIBRARY CONTENT MENU ENTER PAUSE STOP PLAY Notes • Some titles may not display chapter numbers. • When playing the HDD or a DVD-RAM disc, you can access chapters only in the current title if “HDD/RAM title play” ( page 160) is set to “Title resume”.
Playback Playing at various speeds (Continued) Playing frame by frame ENTER PAUSE STOP PLAY QUICK MENU DISPLAY TIME BAR CHP DIVIDE REMAIN PLAY DIMMER FL SELECT ZOOM P i P To resume normal playback Press PLAY or PAUSE. Viewing still pictures (Playing a disc that contains still pictures) EASY NAVI REC MENU EDIT MENU...
Playback DVD-RAM DVD-RW DVD-R DVD-VIDEO Locating by entering the number Locating by entering the number of a desired section Normally titles, chapters, and tracks are numbered. By entering these numbers, you can access a desired section. TOP MENU MENU RETURN ANGLE SUBTITLE AUDIO CHANNEL TIMESLIP...
Playback Locating by entering the number (Continued) Locating a specific point by entering its elapsed time (Time Search) ANGLE SUBTITLE AUDIO CHANNEL TIMESLIP INSTANT REPLAY INSTANT SKIP EASY NAVI REC MENU EDIT MENU LIBRARY CONTENT MENU ENTER PAUSE STOP PLAY QUICK MENU VIDEO Plus+ EXTEND...
Playback DVD-RAM DVD-RW DVD-R DVD-VIDEO Watching a TV broadcast in the sub window (P in P Playback) During playback, you can watch a TV broadcast in the sub window. (P in P : Picture in Picture) OPEN/CLOSE TOP MENU MENU RETURN ANGLE SUBTITLE...
Playback DVD-VIDEO Selecting the camera angle If the scene was recorded with multiple angles, you can easily change the camera angle of the scene you are watching. OPEN/CLOSE TOP MENU MENU RETURN ANGLE SUBTITLE AUDIO CHANNEL TIMESLIP INSTANT REPLAY INSTANT SKIP EASY NAVI REC MENU EDIT MENU...
Playback DVD-RAM DVD-RW DVD-R DVD-VIDEO Selecting Subtitles You can display subtitles on the TV screen and select a subtitle language from those included on the disc. OPEN/CLOSE TOP MENU MENU RETURN ANGLE SUBTITLE AUDIO CHANNEL TIMESLIP INSTANT REPLAY INSTANT SKIP EASY NAVI REC MENU EDIT MENU...
Playback DVD-RAM DVD-RW DVD-R DVD-VIDEO Zooming a picture You can magnify areas within a picture. OPEN/CLOSE TOP MENU MENU RETURN ANGLE SUBTITLE AUDIO CHANNEL TIMESLIP INSTANT REPLAY INSTANT SKIP EASY NAVI REC MENU EDIT MENU LIBRARY CONTENT MENU ENTER PAUSE STOP PLAY QUICK MENU...
Playback DVD-RAM DVD-RW DVD-R DVD-VIDEO Selecting the sound You can select a preferred language and a sound format. OPEN/CLOSE TOP MENU MENU RETURN ANGLE SUBTITLE AUDIO CHANNEL TIMESLIP INSTANT REPLAY INSTANT SKIP EASY NAVI REC MENU EDIT MENU LIBRARY CONTENT MENU ENTER PAUSE STOP...
Page 74
Playback Selecting the sound (Continued) Recorded sounds According to your setting of “NICAM” on the setup menu screen, ( channels of the disc below. Set “NICAM” to “On” or “Off” appropriately. Setting on the setup screen DVD Compatible Mode NICAM On (Mode I) On (Mode II) * This will be “Stereo”...
Page 75
Notes • Some discs allow you to change audio selections only via the disc menu. If this is the case, press the MENU button and choose the appropriate language from the selections on the disc menu. • When you turn on the recorder or replace a disc, the recorder returns to the initial default setting. ( Depending on the disc, the sound that is specified the disc is played back.
Playback Viewing JPEG files You can play JPEG files that have been recorded on a CD-R or CD-ROM on the recorder. Preparations • Prepare a compatible disc ( • Set “Priority contents” ( page 160) to “Photo”. • Make your TV shape conform to the 4:3 picture size. Only 4:3 pictures can be played regardless of the function settings via the on-screen displays of the recorder ( to other sizes, e.g.
The “CONTENT MENU Picture List” appears. Depending on the disc, the recorder creates either temporary folder, “Auto” or “All”. “Auto”: For CD of which compatibility confirmed by TOSHIBA. Only playable files are listed. e.g. CONTENT 1 / 3 Picture List...
Playback Playing MP3/WMA files You can play MP3/WMA files that have been recorded on a CD-R or CD-ROM on this recorder. Preparations • Make sure that a disc you want to play is compatible with this recorder. See • Set “Priority contents” ( page 160) to “Audio”.
(including CD-R containing MP3/WMA files). Given the fact that technology in this area is still maturing, Toshiba cannot guarantee that all genre of recordable discs will produce optimal playback quality. The technical criteria set out in this owner’s manual are meant as a guide only.
Playback DVD-RAM DVD-RW DVD-R DVD-VIDEO Checking the current status and settings You can confirm operational status and setting details. Operational status and setting details OPEN/CLOSE TOP MENU MENU RETURN ANGLE SUBTITLE AUDIO CHANNEL TIMESLIP INSTANT REPLAY INSTANT SKIP EASY NAVI REC MENU EDIT MENU LIBRARY CONTENT MENU...
Using the time bar The time bar shows the current progress in playback or recording. ENTER PAUSE STOP PLAY QUICK MENU REMAIN DISPLAY TIME BAR CHP DIVIDE DIMMER FL SELECT ZOOM P in P PROGRESSIVE TV/VIDEO CHANNEL VOLUME INPUT SELECT SAT.CONT.
Playback Functions in the Quick Menu Besides these examples, various other ones are introduced on respective pages for your convenience. page 24 on how to operate the Quick Menu. To play repeatedly (Repeat playback) DVD-RAM DVD-RW DVD-R DVD-VIDEO You can repeat a desired section. 1) During playback, press QUICK MENU.
Page 83
Cancel random (in Random play mode) Resumes normal playback. Notes • Some discs may not permit random playback operation. • You cannot use the random playback function in conjunction with the memory playback function. • You cannot use the random playback function in conjunction with the repeat playback function.
Page 84
Playback Functions in the Quick Menu (Continued) To display the current bit rate DVD-RAM DVD-RW DVD-R 1) During playback, press QUICK MENU. 2) Press to select “Bit rate”, then press ENTER. Bit rate Note • To turn off the bit rate display, select this item again. To check information on a title DVD-RAM DVD-RW...
Editing You can create your own movie from your assembled scenes. Save your favorite videos in DVD discs. Before editing Creating chapters Playlist editing Creating thumbnails Before dubbing High speed Library dubbing Dubbing selected items Rate conversion dubbing Line-U dubbing Deleting selected items Combine Original titles Creating a DVD-Video using...
Editing Before editing Be sure to read before performing any editing. For better use the HDD of this recorder When you save necessary scenes from recorded contents, it may not be a good method to delete unnecessary portions from a recorded title in the HDD, then copy the remainder to a DVD-RAM disc. Repeating this method increases blank spaces in the HDD, on which contents will be recorded discontinuously (fragmentation in the HDD), resulting in slowdown of the system or incomplete deleting operation, in the worst case, the system may refuse any commands for play or recording, to protect the damaged HDD.
Editing on this recorder Basic steps of editing Creating chapters Programming a Playlist Editing is executed by a title and a chapter. Titles and chapters are classified into “Original” and “Playlist.” First, specify a desired scene by dividing a title (Original) into chapters. Then compile the necessary chapters (Original) in desired order by programming a Playlist.
Page 88
Editing Before editing (Continued) Compile chapters in a desired order. You can select any chapter or order of chapters, as you want. Also you can assign a title to multiple chapters. Each element to be compiled is called a part. In the example to the right, the three chapters in Wednesday, Friday, and Monday are the parts.
Page 89
Make the compiled chapters into a title (Original). (Dubbing) If you just want to play the compiled chapters in desired order, you only play the Playlist. If you want to delete a title (Original) which contains unnecessary chapters, be sure to dub (copy) the Playlist and make it into a title (Original).
Editing DVD-RAM Creating chapters A recording makes 1 title, which includes 1 chapter. By dividing it into several chapters, it will be easier to access a desired scene, and your editing or playback will be much easier. To create chapters in a title, insert a chapter mark. Playback the content, locate a point where you want to divide, then press the CHP DIVIDE button.
OPEN/CLOSE TOP MENU MENU RETURN ANGLE SUBTITLE AUDIO CHANNEL TIMESLIP INSTANT REPLAY INSTANT SKIP EASY NAVI REC MENU EDIT MENU LIBRARY CONTENT MENU ENTER PAUSE STOP PLAY QUICK MENU DISPLAY TIME BAR CHP DIVIDE REMAIN DIMMER FL SELECT ZOOM P in P PROGRESSIVE TV/VIDEO CHANNEL VOLUME...
Page 92
Editing Creating chapters (Continued) OPEN/CLOSE TOP MENU MENU RETURN ANGLE SUBTITLE AUDIO CHANNEL TIMESLIP INSTANT REPLAY INSTANT SKIP EASY NAVI REC MENU EDIT MENU LIBRARY CONTENT MENU ENTER PAUSE STOP PLAY QUICK MENU REMAIN DISPLAY TIME BAR CHP DIVIDE DIMMER FL SELECT ZOOM P in P PROGRESSIVE...
Page 93
Notes • This recorder supports a limited number of chapters on a disc. If exceeded, a message appears. In this event, reduce the number of chapters by merging chapters. ( page 94) • The “EDIT MENU Chapter Editing” can also be viewed by selecting “Chapter Editing”...
Page 94
Editing Creating chapters (Continued) Merging chapters 1) Perform steps 1 to 5 on view the EDIT MENU Chapter Editing display. 2) Press to highlight a chapter. Pressing the PICTURE SEARCH button can access preceding or following pages. 3) Press QUICK MENU. e.g.
Editing DVD-RAM Playlist editing Create a “Playlist” to omit unnecessary scenes for dubbing, or compile desired scenes. OPEN/CLOSE TOP MENU MENU RETURN ANGLE SUBTITLE AUDIO CHANNEL TIMESLIP INSTANT REPLAY INSTANT SKIP EASY NAVI REC MENU EDIT MENU LIBRARY CONTENT MENU ENTER PAUSE STOP...
Page 96
Editing Playlist editing (Continued) OPEN/CLOSE TOP MENU MENU RETURN ANGLE SUBTITLE AUDIO CHANNEL TIMESLIP INSTANT REPLAY INSTANT SKIP EASY NAVI REC MENU EDIT MENU LIBRARY CONTENT MENU ENTER PAUSE STOP PLAY QUICK MENU REMAIN DISPLAY TIME BAR CHP DIVIDE DIMMER FL SELECT ZOOM P in P PROGRESSIVE...
Page 97
OPEN/CLOSE TOP MENU MENU RETURN ANGLE SUBTITLE AUDIO CHANNEL TIMESLIP INSTANT REPLAY INSTANT SKIP EASY NAVI REC MENU EDIT MENU LIBRARY CONTENT MENU ENTER PAUSE STOP PLAY QUICK MENU REMAIN DISPLAY TIME BAR CHP DIVIDE DIMMER FL SELECT ZOOM P in P PROGRESSIVE TV/VIDEO CHANNEL VOLUME...
Page 98
Editing Playlist editing (Continued) Cancelling selection of a part 1) From the “EDIT MENU Playlist Editing”, press to select a part to cancel. 2) Press QUICK MENU. The Quick Menu appears. 3) Press to select “Cancel selected title”, then press ENTER. The part you have selected is cancelled.
Page 99
Making a Playlist of recorded contents where starting times are the same (i.e. daily or weekly recordings) This will help to sort serials. 1) From the “CONTENT MENU Title List”, press QUICK MENU. 2) Press to select “Edit function”, then press ENTER.
Editing DVD-RAM DVD-RW DVD-R Creating thumbnails You can register your favorite scene as a thumbnail displayed on the “CONTENT MENU”. On a finalized DVD-R/RW disc, this feature is not available. OPEN/CLOSE TOP MENU MENU RETURN ANGLE SUBTITLE AUDIO CHANNEL TIMESLIP INSTANT REPLAY INSTANT SKIP EASY...
Page 101
OPEN/CLOSE TOP MENU MENU RETURN ANGLE SUBTITLE AUDIO CHANNEL TIMESLIP INSTANT REPLAY INSTANT SKIP EASY NAVI REC MENU EDIT MENU LIBRARY CONTENT MENU ENTER PAUSE STOP PLAY QUICK MENU REMAIN DISPLAY TIME BAR CHP DIVIDE DIMMER FL SELECT ZOOM P in P PROGRESSIVE TV/VIDEO CHANNEL VOLUME...
Page 102
Editing Creating thumbnails (Continued) Notes • You cannot create thumbnails of chapters in a title that contains a still picture. • If you create a chapter thumbnail, and then shift the chapter mark ( page 93) or record or edit the disc on other devices, the chapter thumbnail may return to the top of the chapter.
Editing Before dubbing You can dub (copy or move) contents recorded in the HDD or DVD-RAM/R/RW, between HDD and DVD-RAM drive or within the same drives. The following contains information and notes about dubbing. Read carefully before dubbing. Dubbing operations This recorder has the following dubbing functions.
Page 104
Editing Before dubbing (Continued) “Copy” and “Move” This recorder’s “Dubbing” has the following two definitions: Copy: The original programme remains after the operation is completed. Move: The moved programme will be erased from the original location after the operation is completed. Whether or not you select either command depends entirely on the given situation.
Page 105
Recording and playback during a dubbing Dubbing process by “High speed dubbing” and “Dub selected items” procedures will allow you to make a recording or playback of other titles. Notes • Timer programmed recording have priority over other operations. Dubbing may be stopped if a timer program recording starts.
Editing DVD-RAM DVD-RW DVD-R High speed Library dubbing This section explains how to dub a spefific title or chapter. To select several parts and dub them all at once, refer to page 108. OPEN/CLOSE TOP MENU MENU RETURN ANGLE SUBTITLE AUDIO CHANNEL TIMESLIP INSTANT REPLAY...
Page 107
OPEN/CLOSE TOP MENU MENU RETURN ANGLE SUBTITLE AUDIO CHANNEL TIMESLIP INSTANT REPLAY INSTANT SKIP EASY NAVI REC MENU EDIT MENU LIBRARY CONTENT MENU ENTER PAUSE STOP PLAY QUICK MENU DISPLAY TIME BAR CHP DIVIDE REMAIN DIMMER FL SELECT ZOOM P in P QUICK MENU PROGRESSIVE Notes...
Editing DVD-RAM DVD-RW DVD-R Dubbing selected items This section explains how to copy several specific titles or chapters. Assigned names of titles/chapters or other information can also be copied. A title or chapter becomes a title by being copied. Preparation •...
Page 109
OPEN/CLOSE TOP MENU MENU RETURN ANGLE SUBTITLE AUDIO CHANNEL TIMESLIP INSTANT REPLAY INSTANT SKIP EASY NAVI REC MENU EDIT MENU LIBRARY CONTENT MENU ENTER PAUSE STOP PLAY QUICK MENU REMAIN DISPLAY TIME BAR CHP DIVIDE DIMMER FL SELECT ZOOM P in P PROGRESSIVE TV/VIDEO CHANNEL VOLUME...
Page 110
Editing Dubbing selected items (Dubbing specified parts together) (Continued) OPEN/CLOSE TOP MENU MENU RETURN ANGLE SUBTITLE AUDIO CHANNEL TIMESLIP INSTANT REPLAY INSTANT SKIP EASY NAVI REC MENU EDIT MENU LIBRARY CONTENT MENU ENTER PAUSE STOP PLAY QUICK MENU REMAIN DISPLAY TIME BAR CHP DIVIDE DIMMER FL SELECT ZOOM...
Page 111
Cancelling selection of an item 1) Press to select an item then press QUICK MENU. The Quick Menu appears. e.g. EDIT Dub Selected Items MENU Quick Menu Cancel selected title Preview Preview all selected items Title information Clear all selected items Auto power off Exit Capacity...
Editing DVD-RAM DVD-RW DVD-R Rate conversion dubbing You can reduce the recorded picture or sound rate when copying. This procedure enables content originally recorded onto the HDD at high rate setting to be dubbed onto a DVD-RAM disc at a reduced bit rate. Use the Rate conversion dubbing when •...
Page 113
OPEN/CLOSE TOP MENU MENU RETURN ANGLE SUBTITLE AUDIO CHANNEL TIMESLIP INSTANT REPLAY INSTANT SKIP EASY NAVI REC MENU EDIT MENU LIBRARY CONTENT MENU ENTER PAUSE STOP PLAY QUICK MENU REMAIN DISPLAY TIME BAR CHP DIVIDE DIMMER FL SELECT ZOOM P in P PROGRESSIVE TV/VIDEO CHANNEL VOLUME...
Editing Rate conversion dubbing (Dubbing at a modified bit rate) (Continued) Rate conversion dubbing for multiple parts OPEN/CLOSE TOP MENU MENU RETURN ANGLE SUBTITLE AUDIO CHANNEL TIMESLIP INSTANT REPLAY INSTANT SKIP EASY NAVI REC MENU EDIT MENU LIBRARY CONTENT MENU ENTER PAUSE STOP...
Page 115
Cancelling dubbing during rate conversion dubbing 1) Press QUICK MENU. 2) Press to select “Cancel dubbing”. 3) Press ENTER. Note • A portion of content from the start of recording to the moment you cancel dubbing will be copied. Turning off the power automatically after dubbing 1) During dubbing, press QUICK MENU.
Dubbing DVD-RAM DVD-RW DVD-R Line-U dubbing You can record the picture being played back in either disc, or to the other disc, if the content is not copy-protected. This procedure can be used also to copy contents of a DVD-R/RW you created ( 122), back to the HDD.
Page 117
OPEN/CLOSE TOP MENU MENU RETURN ANGLE SUBTITLE AUDIO CHANNEL TIMESLIP INSTANT REPLAY INSTANT SKIP EASY NAVI REC MENU EDIT MENU LIBRARY CONTENT MENU ENTER PAUSE STOP PLAY QUICK MENU DISPLAY TIME BAR CHP DIVIDE REMAIN DIMMER FL SELECT ZOOM P in P Notes •...
Editing DVD-RAM DVD-RW DVD-R Deleting selected items This section explains how to simultaneously delete unnecessary titles and chapters. On a finalized DVD-R/RW disc, this feature is not possible. Preparation • Press the HDD or DVD button to select a disc that contains titles or chapters you want to delete. OPEN/CLOSE TOP MENU MENU...
Page 119
LIBRARY CONTENT MENU ENTER PAUSE STOP PLAY QUICK MENU REMAIN DISPLAY TIME BAR CHP DIVIDE DIMMER FL SELECT ZOOM P in P QUICK MENU PROGRESSIVE Notes • To confirm the first and last scenes of an item, first select an item then press the QUICK MENU button. Press the buttons to select “Preview”...
Editing DVD-RAM Combine Original titles Use this feature to combine two titles into one. The second title is deleted as the second title is added to the end of the first title. Preparation • Press the HDD or DVD button to select a disc that contains titles or chapters you want to merge. OPEN/CLOSE TOP MENU MENU...
Page 121
OPEN/CLOSE TOP MENU MENU RETURN ANGLE SUBTITLE AUDIO CHANNEL TIMESLIP INSTANT REPLAY INSTANT SKIP EASY NAVI REC MENU EDIT MENU LIBRARY CONTENT MENU ENTER PAUSE STOP PLAY QUICK MENU REMAIN DISPLAY TIME BAR CHP DIVIDE DIMMER FL SELECT ZOOM P in P PROGRESSIVE TV/VIDEO CHANNEL VOLUME...
* Discs made by this procedure will comply with the DVD-Video standard. However, it is not guaranteed to play properly on all DVD video players (including TOSHIBA products). Depending on the disc, there may be a difference of data capacity between DVD-R and DVD-RW. It may be possible that contents you have just recorded onto a DVD-R cannot be recorded onto a DVD-RW.
Page 123
OPEN/CLOSE TOP MENU MENU RETURN ANGLE SUBTITLE AUDIO CHANNEL TIMESLIP INSTANT REPLAY INSTANT SKIP EASY NAVI REC MENU EDIT MENU LIBRARY CONTENT MENU ENTER PAUSE STOP PLAY QUICK MENU DISPLAY TIME BAR CHP DIVIDE REMAIN DIMMER FL SELECT ZOOM P in P PROGRESSIVE TV/VIDEO CHANNEL VOLUME...
Editing Creating a DVD-Video using DVD-R/RW (Confined) OPEN/CLOSE TOP MENU MENU RETURN ANGLE SUBTITLE AUDIO CHANNEL TIMESLIP INSTANT REPLAY INSTANT SKIP EASY NAVI REC MENU EDIT MENU LIBRARY CONTENT MENU ENTER PAUSE STOP PLAY QUICK MENU REMAIN DISPLAY TIME BAR CHP DIVIDE DIMMER FL SELECT ZOOM P in P...
OPEN/CLOSE MENU RETURN TOP MENU ANGLE SUBTITLE AUDIO CHANNEL TIMESLIP INSTANT REPLAY INSTANT SKIP EASY NAVI REC MENU EDIT MENU LIBRARY CONTENT MENU ENTER PAUSE STOP PLAY QUICK MENU REMAIN DISPLAY TIME BAR CHP DIVIDE DIMMER FL SELECT ZOOM P in P PROGRESSIVE TV/VIDEO CHANNEL VOLUME...
Editing Creating a DVD-Video using DVD-R/RW (Confined) OPEN/CLOSE MENU RETURN TOP MENU ANGLE SUBTITLE AUDIO CHANNEL TIMESLIP INSTANT REPLAY INSTANT SKIP EASY NAVI REC MENU EDIT MENU LIBRARY CONTENT MENU ENTER PAUSE STOP PLAY QUICK MENU REMAIN DISPLAY TIME BAR CHP DIVIDE DIMMER FL SELECT ZOOM P in P...
Page 127
OPEN/CLOSE MENU RETURN TOP MENU ANGLE SUBTITLE AUDIO CHANNEL TIMESLIP INSTANT REPLAY INSTANT SKIP EASY NAVI REC MENU EDIT MENU LIBRARY CONTENT MENU ENTER PAUSE STOP PLAY QUICK MENU REMAIN DISPLAY TIME BAR CHP DIVIDE DIMMER FL SELECT ZOOM P in P PROGRESSIVE TV/VIDEO CHANNEL VOLUME...
Page 128
162). • Content recorded on a recorder other than this recorder (including TOSHIBA products) cannot be copied to a DVD- R/RW using High speed dubbing. First set “DVD compatible mode” to “On (Mode I)” or “On (Mode II)” and record them onto the HDD.
Page 129
Using a favorite scene as a menu You can select favorite scenes from the recorded contents and use them as menus of DVD-Video Created ( page 126) DVD-R/RW. 1) During stop or playback, press CONTENT MENU. 2) Press to select a title which contains a scene to use as menus.
Page 130
Editing Creating a DVD-Video using DVD-R/RW (Confined) To improve legibility of characters on menus Press to set “Back ground color” to “On”. Then select “Color” (“White” or “Black”) according to the menu’s tone, and set “Permeation Ratio”, which sets how translucent the selected Back ground color is.
Page 131
If a message appears while selecting a part You may receive a message, such as “Selection of Writing Test in the next option setting is recommended to check whether Aspect Ratio coexists”. If a copy- prohibited content is included, or if the aspect ratio is changed meanwhile, cancel the selection.
Editing DVD-RW DVD-R DVD-Video finalizing process The recorder processes recorded data in a DVD-R/RW disc so that it can be played on other compatible devices. Important • You cannot rewrite data onto a disc after you execute the DVD-Video finalizing process. However, the disabled rewritability of a DVD-RW disc can be restored by cancelling the process of the disc ( DVD-Video finalizing process is not available.
Page 133
OPEN/CLOSE TOP MENU MENU RETURN ANGLE SUBTITLE AUDIO CHANNEL TIMESLIP INSTANT REPLAY INSTANT SKIP EASY NAVI REC MENU EDIT MENU LIBRARY CONTENT MENU ENTER PAUSE STOP PLAY QUICK MENU REMAIN DISPLAY TIME BAR CHP DIVIDE DIMMER FL SELECT ZOOM P in P PROGRESSIVE TV/VIDEO CHANNEL VOLUME...
Page 134
Editing DVD-Video finalize process (Continued) OPEN/CLOSE TOP MENU MENU RETURN ANGLE SUBTITLE AUDIO CHANNEL TIMESLIP INSTANT REPLAY INSTANT SKIP EASY NAVI REC MENU EDIT MENU LIBRARY CONTENT MENU ENTER PAUSE STOP PLAY QUICK MENU REMAIN DISPLAY TIME BAR CHP DIVIDE DIMMER FL SELECT ZOOM P in P...
Page 135
Notes • DVD-R/RW discs recorded on this recorder may not be recognized on other devices unless you execute DVD- Video finalizing process to them. • You can record onto a DVD-R disc additionally to the limit of the disc capacity, unless you execute the DVD-Video finalizing process to it.
Editing DVD-RAM DVD-RW DVD-R DV recording You can connect a DV format digital video camera to the DV terminal to record from it. Preparation • Press the HDD or DVD button to select a recording media. • Connect a DV format digital video camera to the DV terminal on the front panel. DV terminal OPEN/CLOSE TOP MENU...
Page 137
OPEN/CLOSE TOP MENU MENU RETURN ANGLE SUBTITLE AUDIO CHANNEL TIMESLIP INSTANT REPLAY INSTANT SKIP EASY NAVI REC MENU EDIT MENU LIBRARY CONTENT MENU ENTER PAUSE STOP PLAY QUICK MENU REMAIN DISPLAY TIME BAR CHP DIVIDE DIMMER FL SELECT ZOOM P in P PROGRESSIVE TV/VIDEO CHANNEL VOLUME...
Page 138
Editing DV Recording (Recording from a digital video camera) (Continued) Notes • The DV terminal of this recorder supports only input from a DV format digital video camera. It cannot output to a connected device. Some models of DV format digital video cameras may be not compatible.
Library DVD-RAM Using Library data The recorder has a “Library Management” database which memorizes various properties of recordings made on this recorder, including date, media, title, genre, etc. Using this database, you can search for desired or available discs. You can utilize Library data as follows. •...
Library DVD-RAM Searching for a desired title From the “LIBRARY MENU Title Summary (All Titles)”, you can select a title by using the you change the listing order or sort the titles, search may be easier. Changing the listing order Arrange 1) From the Quick Menu, select “Arrange”...
Library Searching for a desired title (Continued) Jumping Jump 1) From the Quick Menu, select “Jump” by then press ENTER. The sub-menu appears. e.g. LIBRARY Title Summary (All Titles) MENU Date Time 19 : 00 2004/ 6/20 23 : 00 2004/ 6/19 19 : 00 2004/ 6/18...
Library DVD-RAM Viewing Library data This section explains how to check and maintain the Library data. Viewing title information Title information 1) From the Quick Menu, select “Title information” then press ENTER. You can view information about the selected title. e.g.
Library Viewing Library data (Continued) Maintenance of Library data The recorder usually controls the Library database system automatically. However, in the following cases, you must maintain and create data manually. • When you want to add information about a title, (for example when you use a DVD-RAM disc recorded on another device, etc.), to the Library system of the recorder.
Page 145
Erasing unnecessary data When the Library database is full (3000 entries). Select “Del title information”. 1) Press LIBRARY. 2) Press to select a title. 3) Press QUICK MENU. 4) Press to select “Library management” then press ENTER. 5) Press to select “Del title information”, then press ENTER.
Page 146
Library Viewing Library data (Continued) Saving the Library data in a DVD-RAM disc 1) Load a DVD-RAM disc to save the Library data. 2) Press LIBRARY. 3) Press QUICK MENU. 4) Press to select “Library management”, then press ENTER. 5) Press to select “Create backup”, then press ENTER.
Library DVD-RAM Checking remaining space You can check the remaining space of each disc prior to recording. Viewing a number and space of a disc DVD all disc No. 1) From the Quick Menu, select “DVD all disc No.” then press ENTER. You can view numbers, names and estimated remaining spaces about all the registered discs.
Function Setup DVD-RAM DVD-RW DVD-R DVD-VIDEO Customizing the function settings You can change the default settings to customize performance to your preference. OPEN/CLOSE TOP MENU MENU RETURN ANGLE SUBTITLE AUDIO CHANNEL TIMESLIP INSTANT REPLAY INSTANT SKIP EASY NAVI REC MENU EDIT MENU LIBRARY CONTENT MENU ENTER...
Page 151
Setting DVD player settings DVD disc menu language DVD-VIDEO DVD audio language DVD-VIDEO DVD subtitle language DVD-VIDEO DVD dynamic range control DVD-RAM DVD-RW DVD-R DVD-VIDEO Karaoke vocal DVD-VIDEO DVD parental lock DVD-VIDEO DVD title stop DVD-RW DVD-R DVD-VIDEO Picture/audio settings PAL/Auto DVD-RAM DVD-RW...
Page 152
Function Setup Customizing the function settings (Continued) Setting Display settings TV shape DVD-RAM DVD-RW DVD-R DVD-VIDEO On screen display DVD-RAM DVD-RW DVD-R DVD-VIDEO Transparency DVD-RAM DVD-RW DVD-R DVD-VIDEO Startup screen Screen protector DVD-RAM DVD-RW DVD-R DVD-VIDEO Background Operational settings Operation beep DVD-RAM DVD-RW DVD-R...
Page 153
Setting DVD recorder operation AV record quality DVD-RAM DVD-RW DVD-R Picture record mode DVD-RAM DVD-RW DVD-R Audio input level DVD-RAM DVD-RW DVD-R Aspect ratio(video mode) DVD-RW DVD-R DVD compatible mode DVD-RAM DVD-RW DVD-R DVD-Video:CHP create DVD-RW DVD-R Relay recording DVD-RAM Management settings Genre setting DVD-RAM...
Function Setup Customizing the function settings (Continued) DVD player settings DVD disc menu language DVD-VIDEO English: To display disc menus in English. French: To display disc menus in French. German: To display disc menus in German. Spanish: To display disc menus in Spanish. Italian: To display disc menus in Italian.
Page 155
Others: To make a further choice. After pressing the ENTER button, follow steps 1) – 4) below. e.g. DVD player settings DVD disc menu language English DVD audio language English DVD subtitle language No subtitle DVD dynamic range control Karaoke vocal 1) Obtain the language code of the preferred language from the Language code list page 171).
Page 156
Function Setup Customizing the function settings (Continued) Country/Area AUSTRALIA BELGIUM CANADA CHINA CHINA HONG KONG DENMARK FINLAND FRANCE GERMANY INDONESIA ITALY JAPAN MALAYSIA NETHERLANDS NORWAY PHILIPPINES RUSSIAN FEDERATION SINGAPORE SPAIN SWEDEN SWITZERLAND TAIWAN THAILAND UNITED KINGDOM UNITED STATES 3) Select the desired limitation level by pressing the buttons, and then press the ENTER button.
Picture/Audio settings PAL/Auto DVD-RAM DVD-RW DVD-R DVD-VIDEO PAL: To play a PAL disc. Connect a PAL TV to view a picture. Auto: The recorder automatically identifies PAL or NTSC video system of a disc. Connect a multisystem TV (PAL/NTSC compatible) to view a picture. A playback picture may be distorted when detected a signal change between PAL and NTSC on the disc.
Page 158
Function Setup Customizing the function settings (Continued) Play DNR DVD-RAM DVD-RW DVD-R Selects a setting for playback at a reduced noise level. Press the buttons to select an item then select “On” or “Off” using the buttons. 3D-DNR: Off: Not activated. Reduces the noise levels of brightness signals and color signals present in the video signal during playback.
Off: Deactivates the screen protector function. Activates the screen protector function. Note • Toshiba does not guarantee that this function protects the TV screen by all means. Background Selects a screen colour when receiving no video signals such as selecting a non-broadcasting channel.
• You cannot turn off beeps for alerts irrespective of this setting. IR Code Switches the codes to operate the recorder. If you use the second and third TOSHIBA HDD/DVD video recorders, set the different remote codes for each recorder to avoid confusion in the response of the recorders.
DVD recorder operation AV record quality DVD-RAM DVD-RW DVD-R You can select from 5 combined picture and sound quality recording settings prior to actual recording. Actual selection applied becomes the default setting for the normal recording or programmed recording. e.g. AV record quality Setting 1 Manual 6.6...
Page 162
Function Setup Customizing the function settings (Continued) Aspect ratio(video mode) DVD-RW DVD-R To set the aspect ratio when recording onto a DVD-R/RW disc. 4:3: Fixes the aspect ratio at 4:3. 16:9: Fixes the aspect ratio at 16:9. Note • When the bit rate on “AV record quality” is set to “1.4(Mbps)”, pictures are recorded in 4:3 aspect ratio even if “16:9”...
Management settings Genre setting DVD-RAM DVD-RW DVD-R This registers a frequently used genre name onto the menu. Genre names registered here are displayed in the “Genre” on the Quick Menu. 1) Press the buttons to select a position in the “Current genre list” you want to change, then press the ENTER button.
Function Setup Customizing the function settings (Continued) HDD Format Initializes the HDD. Normally it is not required to initialize the HDD. However when the HDD does not function correctly, initializing the HDD may solve the situation. If you initialize the HDD, all titles and Library information stored in the HDD are permanently deleted.
Others Before calling service personnel If you experience any of the following difficulties while using this unit, check the list below before consulting your nearest Toshiba dealer. Power The power is not turned on. • The power cord is not connected securely.
Page 167
Recording Cannot be recorded on a DVD-RAM disc. • The disc is protected from deleting data. Set the write-protect tab to the opposite of “PROTECT” ( page 8). • The disc is protected by a PC or the recorder. Disable the protection on the device which protected the disc.
Others Before calling service personnel (Continued) Remote control The remote control does not work. • The batteries in the remote control are exhausted. Replace all the batteries in the remote control page 12, “INSTALLATION GUIDE”). • The light emitter of the remote control is not pointed at the receptor of this recorder.
Unexpected error detected. ER-7000 Possible error detected in the HDD. Note • If you find an error code other than listed above, consult your nearest TOSHIBA dealer. • When creating a DVD-Video • When creating a DVD-Video • When recording on DVD-R/RW •...
Others Recording duration D/M1(192kbps) Sound rate DVD-RAM Picture quality rate Hour Minute Hour Minute • The recording duration listed above is reference only. Not guaranteed. • This recording duration applies to the DVD-RAM disc in its initialized condition. The display may vary depending on the disc.
Others Language code list Table of languages and their abbreviations Abbreviation Language – – – No alternate language CHI (ZH) Chinese DUT (NL) Dutch ENG (EN) English FRE (FR) French GER (DE) German ITA (IT) Italian JPN (JA) Japanese KOR (KO) Korean MAY (MS) Malay...
Others Specification Power requirement during operation Power requirement at standby 3.7W (Eco mode: off) 1.9W (Eco mode: on) Power supply 230 - 240V AC, 50/60 Hz Mass 4.7kg External dimension Width 430 x Height 78 x Depth 325mm Tuner System: Frequency synthesizer Channel coverage: PAL I VHF: A-J, 11, 13, E2-E12 UHF: E21-E69 CATV: X, Y, Z, S1-S41, 1-53...
Page 173
DIGITAL AUDIO OUTPUT BITSTREAM/PCM (OPTICAL terminal) Optical connector x 1 system DIGITAL AUDIO OUTPUT BITSTREAM/PCM (COAXIAL terminal) 0.5Vp-p (75 ), pin jack x 1 system CHANNEL CHANGE IR jack This is for connection of the supplied IR control cable only. DV input 4-pin x 1 in front Remote control...