Table of Contents
Advertisement
Operation Manual / A130-H.. - A140-H..
3 Removing and Installing / 3.3 Installing the turbocharger
3.3.2
Fitting threaded rods
Fig. 16: Fitting threaded rods onto the bracket
1. Lightly oil the surfaces of the threaded rods (02) to be screwed in.
2. Screw the threaded rods into the bracket with the aid of locknuts (01).
3. Remove nuts (01) again.
Requirements for the threaded rods
Fig. 17: Requirements for threaded rods
Product
Threaded rod
A130-H
A135-H
Ø 20 / M20
A140-H
Table 5: Requirements for threaded rods
Fastening material, scope of delivery
The threaded rods and nuts for fastening the turbocharger on the bracket are not included
in the ABB scope of delivery.
The clamping nuts are included in the ABB scope of delivery.
© Copyright 2021 ABB. All rights reserved.
Diameter
Material
DIN / ISO 898
[mm]
Ø 16 / M16
10.9 / 12.9
10.9 / 12.9
Ø 24 / M24
10.9 / 12.9
Thread length
L1 [mm]
(Part 1)
≥ 30
≥ 30
≥ 70
HZTL4030_EN
Length of
threaded rod
L2 [mm]
250
325
410 ... 420
Rev.G
July 2021
Advertisement
Chapters
Table of Contents
