Computer Input Source Selection - Sanyo PLC-XM80 Owner's Manual

Hide thumbs

Table Of Contents

Table of Contents

Input Selection

Menu Operation

Press the MENU button to display the On-Screen Menu. Use

the Point pq buttons to select Input and then press the

Point u or the SELECT button.

Use the Point pq buttons to select the desired input and

then press the Point u button to access the submenu items.

Use the Point pq buttons to select the desired source and

then press the SELECT button.

WHEN SELECTING INPUT 1 (COMPUTER INPUT

TERMINALS )

RGB(PC analog)

When your computer is connected to the INPUT 1 (ANALOG)

terminal, select RGB (PC analog).

RGB(PC digital)

When your computer is connected to INPUT 1 (DIGITAL)

terminal, select RGB(PC digital).

PNote:

Input source changes if the INPUT 1 button on the remote control is

pressed.

WHEN SELECTING INPUT (5 BNC INPUT jACKS )

When connecting the computer output [5 BNC Type (Green, Blue,

Red, Horiz. Sync, and Vert. Sync.)] from the computer to G, B, R,

H/HV, and V jacks:

RGB

When your computer is connected to the INPUT 2 (5 BNC

INPUT JACKS) terminal, select RGB.