Basic control
Installing the unit
• When installing this unit, make sure to put it
on a level and stable surface.
Don
t install it on the following places:
'
– on a color TV (the screen may distort)
– near a cassette deck (or close to a device
that gives off a magnetic ield). This may
interfere with the sound.
– in direct sunlight
– in damp or wet areas
– in extremely hot or cold areas
– in places where there is vibration or other
movement
– in places that are very dusty or that have
hot fumes or oils (such as a kitchen)
1
2
3
4
5
6
7
8
4
En
Loading the batteries
The batteries included with this unit are to
check initial operations; they may not last
over a long period. We recommend using
alkaline batteries that have a longer life.
WARNING
• Do not use or store batteries in direct
sunlight or other excessively hot place,
such as inside a car or near a heater. This
can cause batteries to leak, overheat,
explode or catch ire. It can also reduce the
life or performance of batteries.
Switching the unit between standby and on
9
Press u SYSTEM ( 1 ) to turn on the stereo receiver and CD player.
Press u RECEIVER ( 1 ) to turn on the stereo receiver only.
10
Press u CD ( 1 ) to turn on the CD player only.
11
Setting the clock
1. Press CONTROL RCV ( a ).
2. Press CLOCK ( 4 ) and press ENTER ( 6 ).
12
3. Use k/l and ENTER ( 6 ) to adjust the day of the week and time.
Control the display brightness
1. Press CONTROL RCV (for the stereo receiver) ( a ) or CONTROL CD (for the CD player) ( a ).
13
2. Press DIMMER ( d ) to switch the display brightness in four steps.
Control sound and adjust volume
Press DIRECT ( b ) to listen to the sound source in the original sound quality.
Press TREBLE +/– ( c ) or BASS +/– ( c ) to adjust sound quality.
14
Press VOLUME +/– ( e ) to adjust the listening volume.
Press MUTE ( e ) to mute the sound.
Listening to the audio CD
1. Press CD/USB ( 2 ).
USB ( 2 ) to select CD function for the CD player.
2. Press CD
3. Press h OPEN/CLOSE ( 9 ) to open the disc tray, and place a disc.
4. Press d ( 7 ) to start playback. Use numeric buttons ( 8 ) or o/p ( 7 ) to select a track.
5. Press REPEAT ( f ) or SHUFFLE ( g ) to adjust the play mode.
15
Playing iPod/iPhone/iPad mini/USB device
16
1. Press CD/USB ( 2 ).
USB ( 2 ) to select iPod/USB function for the CD player, and connect your iPod/iPhone/iPad
2. Press CD
mini/USB device to the iPod/iPhone/iPad mini/USB terminal.
3. Press d ( 7 ) to start playback.
Listening to the radio
1. Press TUNER ( 3 ).
2. Press CONTROL RCV ( a ), and press BAND ( 3 ) to select a band (FM MONO or FM STEREO).
3. Use TUNE i/j ( 6 ) to tune.
Listening to DAB (XP-01DAB only)
1. Press TUNER ( 3 ).
2. Press CONTROL RCV ( a ), and press BAND ( 3 ) to select DAB.
3. Press TUNE i/j ( 6 ) to select a DAB service, and press ENTER ( 6 ).
When listening to DAB for the irst time, press AUTO TUNE ( 5 ) instead of the operation in step 3.
CAUTION
• Incorrect use of batteries may result in
such hazards as leakage and bursting.
Observe the following precautions:
– Never use new and old batteries together.
– Insert the plus and minus sides of the
batteries properly according to the marks
in the battery case.
– Batteries with the same shape may have
different voltages. Do not use different
batteries together.
– When inserting the batteries, make
sure not to damage the springs on the
battery's (–) terminals. This can cause
batteries to leak or overheat.
– When disposing of used batteries, please
comply with governmental regulations or
environmental public institution's rules
that apply in your country/area.