Advertisement
5
Press [OK].
Displaying a Signal Name
You can display the name of a signal assigned to a
subscreen.
1
Open the Home > Setup > Switcher > Multi Viewer
menu (19103.21).
2
Display the target multi viewer to set.
Select a tab to change the multi viewer to display.
[MV1] tab: Multi viewer 1
[MV2] tab: Multi viewer 2
3
Press [•••] (overflow button) on the right of the target
subscreen to set.
The [Select Displayed Information] window appears.
4
Place a check mark in [Name].
To not display a signal name, clear the check mark.
To display the signal names of all subscreens
Set the [Enable All Names] button to the on state.
Displaying an Audio Level Meter
Note
An audio level meter can be configured only when the
XKS-G1600 GPU Pack (option) is installed.
1
Open the Home > Setup > Switcher > Multi Viewer
menu (19103.21).
2
Display the target multi viewer to set.
Select a tab to change the multi viewer to display.
[MV1] tab: Multi viewer 1
[MV2] tab: Multi viewer 2
3
Press [•••] (overflow button) on the right of the target
subscreen to set.
The [Select Displayed Information] window appears.
4
Place a check mark in [Audio Level Meter].
To not display the audio level meter, clear the check
mark.
To display the audio level meter of all
subscreens
Set the [Enable All Audio Meters] button to the on state.
Displaying a Clock
You can display a clock in a multi viewer subscreen.
Notes
• A clock can be configured only when the XKS-G1600
GPU Pack (option) is installed.
• Only one subscreen can be configured with a clock.
1
Open the Home > Setup > Switcher > Multi Viewer
menu (19103.21).
2
Display the target multi viewer to set.
Select a tab to change the multi viewer to display.
[MV1] tab: Multi viewer 1
[MV2] tab: Multi viewer 2
3
Press the button for the target subscreen to set.
The [Select Displayed Signal] window appears.
4
Set the button for the target clock to the on state.
Analog: Analog clock
Digital: Digital clock
5
Press [OK].
389
Advertisement
Chapters
