Table of Contents
Advertisement
Operation Manual / A150-M56/66/57/67 - A155-M..
3 Removing and Installing / 3.2 Removing the turbocharger
Fig. 14: Loosening the clamping nut
1. Working in a circle, break loose each pressure screw (≤ 20°).
2. Working in a circle, loosen each pressure screw by 45° in 4 rounds.
3. Working in a circle, loosen each pressure screw by 90° in 1...5 rounds until all of the pres-
sure screws have been relieved.
Loosen clamping nut by hand.
u
© Copyright 2022 ABB. All rights reserved.
HZTL4032_EN
Rev.S
February 2022
Advertisement
Chapters
Table of Contents
