hit counter script

Paper Stacking Fault/Paper Fall From The Tray/Paper Misalignment (Booklet/Staple Finisher-D1) - Canon imageRUNNER ADVANCE 8105 Series Manual

Symptoms & solutions
Hide thumbs Also See for imageRUNNER ADVANCE 8105 Series:
Table of Contents

Advertisement

Symptom

Paper stacking fault/Paper fall from the tray/Paper misalignment (Booklet/Staple Finisher-D1)

[ Inspected by Canon Inc. ]
Symptom
When paper is output from Booklet/ Staple Finisher-D1, the following problems may occur.
- Stacking fault
- Paper fall from the tray
- Misalignment of paper stacks
Cause
At five locations indicated by [a] to [e], if a tension spring is not installed properly or if a tension spring is
installed though it is not required, the belt tension for transferring the motor drive deviates from the
normal setting value. In this state, when the paper stacked on the buffer path unit is returned to the
processing tray unit, a failure occurs, causing paper sheets to be misaligned each other. As a result, the
above symptom occurs. Below are the photo indicating the five locations [a] to [e] and the table showing
proper installation of a tension spring at the locations and belts having the tension affected.
Proper installation of
tension spring
[a] Spring installed
[b] Spring installed
[c] Spring installed
[d] No spring installed
[e] No spring installed
Belts affected
Processing tray paper retainer drive belt
Feed drive belt
Buffer feed drive belt
Feed roller disengage/ Buffer flapper drive belt
Stack delivery upper drive belt
pg. 143

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ir-adv 8205 120vIr-adv 8205 pro 230v eurIr-adv 8205g 120vIr-adv 8295 pro 230v eurIr-adv 8295 120vIr-adv 8285 pro 230v eur ... Show all

Table of Contents

Save PDF