Options For Air Conditioners - Toshiba BMS-CT2560U-E Owner's Manual
Touch screen controller
Hide thumbs
Also See for BMS-CT2560U-E:
- Installation manual (20 pages) ,
- Quick reference manual (2 pages) ,
- Service manual (187 pages)
Table of Contents
Advertisement
Touch Screen Controller
4
To change, tap
For details on the confirmation/setting contents of each item, refer to the following. The items displayed
depend on the model and state.
Options for air conditioners
Function Name
Ventilation → ON/OFF
Ventilation → Mode
Ventilation → Fan speed Controls the operation of the ventilator connected to the air to
Ventilation → Control
Power Level
Outdoor temp.
Night operation setting
(VRF, LC, ESTIA)
Night operation setting
(RAC)
Filter sign reset
Inspection
Soft Cooling
Energy saving ratio [%]
Saving operation
Forced Thermo OFF
Return Back
Power peak cut
Eco Temperature Shift
Frost protection
Set temp. range limit
HiPower
ECO
Power Select
PURE
Fireplace
Notice Code
Check Code (During
backup operation)
Unit information
to display the settings screen, then tap [OK] after changing the settings
Overview
Controls the operation of the ventilator connected to the air to
air heat exchanger(s) or the air conditioner(s).
Controls the ventilation mode of the ventilator connected to the
air to air heat exchanger(s) or the air conditioner(s).
air heat exchanger(s) or the air conditioner(s).
24-hour ventilation/Nighttime heat purge
You can monitor the output status of the air conditioner(s).
You can monitor the outdoor temperature detected by the
outdoor unit.
Outdoor units can be set to low sound.
Outdoor units can be set to low sound.
You can clear the FILTER Sign.
You can clear the Hour.
You can check the check code that has occurred.
You can set to Middle COOL.
You can control the cooling/heating output of the air
conditioner(s).
You can operate the indoor unit by saving the power.
You can release Thermo OFF.
You can control Return Back.
You can monitor whether the outdoor unit is controlling
demand.
You can set whether to change (shift) the set temperature.
Frost protection can be controlled.
You can change the set temperature range for each operation
mode.
HiPower can be controlled.
ECO can be controlled.
Power Select can be controlled.
PURE can be controlled.
Fireplace can be controlled.
Displays Notice Codes that occur during operations.
Displays Check Codes that occur during backup operations.
Unit information can be confirmed.
Owner's Manual
Setting Items
ON/OFF
Bypass/Heat exchange/
Automatic
High/Middle/
Supply air > Exhaust air/
Exhaust air > Supply air
–
–
–
ON/OFF
OFF, Night operation 1,
Night operation 2
OK/Cancel
–
ON/OFF
Release (100%)/
Max.(50 - 100%)/50/0
ON/OFF
Invalid
Cool (release, enable),
Heat (release, enable)
–
OK/Cancel
ON/OFF
18°C to 29°C
* It may differ depending
on the region and
model.
ON/OFF
ON/OFF
50%, 75%, 100%
ON/OFF
OFF, Fireplace 1,
Fireplace 2
–
–
–
Reference
Page
P.55
P.55
P.55
–
P.55
P.56
P.56
P.56
P.56
–
P.56
P.57
P.57
P.57
P.57
P.57
P.58
P.58
P.59
P.59
P.59
P.60
P.60
P.60
P.60
P.60
P.61
-EN
53
Hide quick links:
Advertisement
Table of Contents
