Completing The Installation; Replacing The Bezel; Replacing The Side Cover - IBM IntelliStation M Pro Installation Manual
Hide thumbs
Also See for IntelliStation M Pro:
- Hardware maintenance manual (190 pages) ,
- User manual (120 pages) ,
- Installation manual (112 pages)
Table of Contents
Advertisement
Completing the installation
To complete your installation, reinstall the bezel, connect all the cables and, for
certain options, run the Configuration/Setup Utility program. Follow the instructions
in this section.
Replacing the bezel
Complete the following steps to replace the bezel:
1. Insert the tabs on the back of the bezel into the matching holes on the computer
2. Push the bezel toward the computer until the tabs snap into place.
Replacing the side cover
Complete the following steps to replace the side cover:
1. Make sure that all cables, adapters, and other components are installed and
2. Install the side cover by placing it into position on the computer. Make sure that
3. Reconnect the external cables and power cords to the computer; then, connect
4. Turn on the attached devices; then, turn on the computer.
chassis.
seated correctly and that you have removed all work tools or parts from inside
the computer.
the lip on the bottom of the cover rests on the ledge on the bottom of the
chassis. Slide the side cover forward to lock the side cover.
the power cords to electrical outlets.
Chapter 2. Installing the hardware
31
Advertisement
Table of Contents
