• Explosive hazards, such as a damaged cathode ray tube (CRT) face or a bulging capacitor • Mechanical hazards, such as loose or missing hardware Lenovo Legion Pro 5i (16″, 8) and Lenovo Legion Pro 5 (16″, 8) Hardware Maintenance Manual...
4. Check for cracked or bulging batteries. 5. Remove the cover. 6. Check for any obvious non-Lenovo alterations. Use good judgment as to the safety of any non-Lenovo alterations. 7. Check inside the unit for any obvious unsafe conditions, such as metal filings, contamination, water or other liquids, or signs of fire or smoke damage.
• English • Arabic • Brazilian Portuguese • French • German • Hebrew • Japanese • Korean • Spanish • Traditional Chinese DANGER DANGER DANGER Lenovo Legion Pro 5i (16″, 8) and Lenovo Legion Pro 5 (16″, 8) Hardware Maintenance Manual...
CRU list Table 1. CRU list Type ac power adapter self-service power cord self-service Lenovo Legion Pro 5i (16″, 8) and Lenovo Legion Pro 5 (16″, 8) Hardware Maintenance Manual...
Page 30
Thermal module System board hook System board Touchpad cable Upper case (with keyboard) ac power adapter Power cord Screw kit * for selected models Lenovo Legion Pro 5i (16″, 8) and Lenovo Legion Pro 5 (16″, 8) Hardware Maintenance Manual...
Chapter 4. Removing a FRU or CRU Service tools The following table lists tools for servicing Lenovo computers. Tools with a cross mark are needed for serving the product models as described by this publication. Prepare them before you service the product.
Place the computer upside down on a flat surface. Step 2. Remove ten screws. Pry up the latches and then remove the lower case. Figure 3. Remove the lower case Lenovo Legion Pro 5i (16″, 8) and Lenovo Legion Pro 5 (16″, 8) Hardware Maintenance Manual...
Screw specifications Number of screws M2 × L4.0 M2 × L11.8 Go to to look up the Lenovo part numbers of the following https://support.lenovo.com/partslookup replacement part: Lower case Remove the DC-in bracket Make sure the following FRUs (or CRUs) have been removed.
“Remove the lower case” on page 28 “Remove the memory shielding” on page 29 Step 1. Open the latches and remove the memory modules. Lenovo Legion Pro 5i (16″, 8) and Lenovo Legion Pro 5 (16″, 8) Hardware Maintenance Manual...
Figure 6. Remove the memory modules Go to to look up the Lenovo part numbers of the following https://support.lenovo.com/partslookup replacement part: Memory modules Remove the left SSD bracket Make sure the following FRUs (or CRUs) have been removed. “Remove the lower case” on page 28 Step 1.
Remove one screw and then remove the left 2242 SSD. Figure 8. Remove the left 2242 SSD Screw specifications Number of screws M2 × L1.8 Step 2. Remove the left 2242 SSD holder. Lenovo Legion Pro 5i (16″, 8) and Lenovo Legion Pro 5 (16″, 8) Hardware Maintenance Manual...
2. X-RiteColorAssistant.exe will auto run. Click Restore Profile button from prompted window to restore the profile from Lenovo cloud. Go to to look up the Lenovo part numbers of the following https://support.lenovo.com/partslookup replacement parts: 2242 SSD 2242 SSD holder Remove the left 2280 SSD (for selected models) Make sure the following FRUs (CRUs) have been removed.
Page 40
Number of screws Screw specifications M2.5 × L3.2 Notes: For LCD panel with the factory color calibration feature, do the following to install new color profiles: Lenovo Legion Pro 5i (16″, 8) and Lenovo Legion Pro 5 (16″, 8) Hardware Maintenance Manual...
2. X-RiteColorAssistant.exe will auto run. Click Restore Profile button from prompted window to restore the profile from Lenovo cloud. Go to to look up the Lenovo part numbers of the following https://support.lenovo.com/partslookup replacement parts: 2280 SSD 2280 SSD holder Remove the coin-cell battery Make sure the following FRUs (CRUs) have been removed.
“Remove the lower case” on page 28 “Remove the right SSD bracket” on page 35 Step 1. Remove one screw and then remove the right 2242 SSD. Lenovo Legion Pro 5i (16″, 8) and Lenovo Legion Pro 5 (16″, 8) Hardware Maintenance Manual...
Page 43
Figure 14. Remove the right 2242 SSD Screw specifications Number of screws M2 × L1.8 Step 2. Remove the right 2242 SSD holder. Figure 15. Remove the right 2242 SSD holder Screw specifications Number of screws M2.5 × L3.2 Notes: For LCD panel with the factory color calibration feature, do the following to install new color profiles: Chapter 4 Removing a FRU or CRU...
Remove one screw and then remove the right 2280 SSD. Figure 16. Remove the right 2280 SSD Screw specifications Number of screws M2 × L1.8 Step 2. Remove the right 2280 SSD holder. Lenovo Legion Pro 5i (16″, 8) and Lenovo Legion Pro 5 (16″, 8) Hardware Maintenance Manual...
2. X-RiteColorAssistant.exe will auto run. Click Restore Profile button from prompted window to restore the profile from Lenovo cloud. Go to to look up the Lenovo part numbers of the following https://support.lenovo.com/partslookup replacement parts: 2280 SSD 2280 SSD holder Remove the Wi-Fi card Make sure the following FRUs (or CRUs) have been removed.
Disconnect the thermal module connectors from the system board. Loosen seven screws in alphabetical order and remove four screws. Then, remove the thermal module. Lenovo Legion Pro 5i (16″, 8) and Lenovo Legion Pro 5 (16″, 8) Hardware Maintenance Manual...
Number of screws M2.5 × L7.0 M2 × L5.0 Go to https://support.lenovo.com/partslookup to look up the Lenovo part numbers of the following replacement part: Thermal module Remove the USB board Make sure the following FRUs (CRUs) have been removed: “Remove the lower case” on page 28 “Remove the left SSD bracket”...
“Remove the lower case” on page 28 “Remove the left SSD bracket” on page 31 Step 1. Remove six screws and then remove the battery pack. Lenovo Legion Pro 5i (16″, 8) and Lenovo Legion Pro 5 (16″, 8) Hardware Maintenance Manual...
Figure 21. Remove the battery pack Screw specifications Number of screws M2 × L5 Go to to look up the Lenovo part numbers of the following https://support.lenovo.com/partslookup replacement part: Battery pack Remove the touchpad cable Make sure the following FRUs (or CRUs) have been removed.
Disconnect the speaker cables from the system board. Then, carefully remove the speakers. Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable. Lenovo Legion Pro 5i (16″, 8) and Lenovo Legion Pro 5 (16″, 8) Hardware Maintenance Manual...
Figure 23. Remove the speakers Go to to look up the Lenovo part numbers of the following https://support.lenovo.com/partslookup replacement part: Speakers Remove the system board and the USB board cable Make sure the following FRUs (or CRUs) have been removed.
Page 52
Screw specifications Number of screws M2 × L5.0 Step 3. Disconnect the keyboard backlight cable from the system board and then remove the system board. Lenovo Legion Pro 5i (16″, 8) and Lenovo Legion Pro 5 (16″, 8) Hardware Maintenance Manual...
Disconnect the USB board cable from the system board and then remove the USB board cable. Figure 27. Remove the USB board cable Go to https://support.lenovo.com/partslookup to look up the Lenovo part numbers of the following replacement parts: System board USB board cable...
Figure 28. Remove six screws and open the latches Screw specifications Number of screws M 2.5 × L7 M1.6 × L2.5 Step 2. Remove the strip cover. Lenovo Legion Pro 5i (16″, 8) and Lenovo Legion Pro 5 (16″, 8) Hardware Maintenance Manual...
Figure 29. Remove the strip cover Go to to look up the Lenovo part numbers of the following https://support.lenovo.com/partslookup replacement part: Strip cover Remove the LCD unit Make sure the following FRUs (CRUs) have been removed. “Remove the lower case” on page 28 “Remove the left SSD bracket”...
Page 56
Figure 31. Disconnect and lift the EDP cable Step 3. Turn over the computer. Place the computer on a flat surface as shown. Then, remove the LCD unit. Lenovo Legion Pro 5i (16″, 8) and Lenovo Legion Pro 5 (16″, 8) Hardware Maintenance Manual...
Figure 32. Remove the LCD unit Go to to look up the Lenovo part numbers of the following https://support.lenovo.com/partslookup replacement part: LCD unit Remove the upper case (with keyboard) Make sure the following FRUs (CRUs) have been removed. “Remove the lower case” on page 28 “Remove the DC-in bracket”...
“Remove the lower case” on page 28 “Remove the LCD unit” on page 49 “Remove the hinge cover” on page 52 Step 1. Remove the LCD bezel. Lenovo Legion Pro 5i (16″, 8) and Lenovo Legion Pro 5 (16″, 8) Hardware Maintenance Manual...
Figure 34. Remove the LCD bezel Note: The LCD bezel is fragile and should be replaced if damaged. Go to to look up the Lenovo part numbers of the following https://support.lenovo.com/partslookup replacement part: LCD bezel Remove the camera bracket Make sure the following FRUs (CRUs) have been removed.
“Remove the LCD bezel” on page 52 “Remove the camera bracket” on page 53 Step 1. Pull out the removable tapes. Then, lift the LCD panel. Lenovo Legion Pro 5i (16″, 8) and Lenovo Legion Pro 5 (16″, 8) Hardware Maintenance Manual...
Page 61
1. Connect your computer to the network and close the X-Rite Color Assistant program. 2. Go to to download the installation https://pcsupport.lenovo.com/us/en/downloads/DS543953 software. Double-click the EXE file and follow the on-screen instructions to finish the installation. 3. Go to C:\Program files (x86)\X-Rite Color Assistant and locate the ProfileUpdaterForDisplayReplacement.exe file.
“Remove the LCD unit” on page 49 “Remove the hinge cover” on page 52 “Remove the LCD bezel” on page 52 “Remove the camera bracket” on page 53 Lenovo Legion Pro 5i (16″, 8) and Lenovo Legion Pro 5 (16″, 8) Hardware Maintenance Manual...
“Remove the LCD panel” on page 54 Step 1. Remove the microphone rubbers from the camera board. Figure 39. Remove the microphone rubbers Go to to look up the Lenovo part numbers of the following https://support.lenovo.com/partslookup replacement part: Microphone rubbers Remove the camera board Make sure the following FRUs (CRUs) have been removed.
“Remove the LCD panel” on page 54 Step 1. Disconnect the camera cable from the camera board and the sensor board. Then, remove the camera cable. Lenovo Legion Pro 5i (16″, 8) and Lenovo Legion Pro 5 (16″, 8) Hardware Maintenance Manual...
Figure 41. Disconnect and remove the camera cable Go to to look up the Lenovo part numbers of the following https://support.lenovo.com/partslookup replacement part: Camera cable Remove the sensor board Make sure the following FRUs (CRUs) have been removed. “Remove the lower case” on page 28 “Remove the LCD unit”...
“Remove the sensor board” on page 59 Go to to look up the Lenovo part numbers of the following https://support.lenovo.com/partslookup replacement part: LCD cover Lenovo Legion Pro 5i (16″, 8) and Lenovo Legion Pro 5 (16″, 8) Hardware Maintenance Manual...
Page 68
Morocco 10 mm x 10 mm Indonesia 15 mm x 10 mm Belarus 40 mm x 8 mm Japan 52 mm x 10 mm Lenovo Legion Pro 5i (16″, 8) and Lenovo Legion Pro 5 (16″, 8) Hardware Maintenance Manual...