hit counter script
Epson SureColor T5270 Manual
  1. Manuals
  2. Brands
  3. Epson Manuals
  4. Printer
  5. SureColor T-5270
  6. Manual
Epson SureColor T5270 Manual

Epson SureColor T5270 Manual

Hide thumbs Also See for SureColor T5270:
Table of Contents

Advertisement

Quick Links

Download this manual
|
1
Contents
Unpacking and Assembling the Printer ..................................................................................................3
Setting up the SureColor T3270/T5270/T7270 ....................................................................................5
Setting up the SureColor T5270D/T7270D ........................................................................................15
Connecting the Power Cord ................................................................................................................24
Installing Ink Cartridges ......................................................................................................................25
Loading Roll Paper ..............................................................................................................................26
Loading Roll Paper into the Secondary Roll Unit ................................................................................32
Performing a Test Print .......................................................................................................................36
Aligning the Print Head .......................................................................................................................36
Installing Software ...............................................................................................................................37
Updating Your Printer Firmware .........................................................................................................37
Limited Warranty ................................................................................................................................39

Advertisement

Table of Contents
loading

Related Manuals for Epson SureColor T5270

Summary of Contents for Epson SureColor T5270

  • Page 1: Table Of Contents

    Contents Unpacking and Assembling the Printer ....................3 Setting up the SureColor T3270/T5270/T7270 ..................5 Setting up the SureColor T5270D/T7270D ..................15 Connecting the Power Cord ........................24 Installing Ink Cartridges ........................25 Loading Roll Paper ..........................26 Loading Roll Paper into the Secondary Roll Unit ................32 Performing a Test Print ........................36 Aligning the Print Head ........................36 Installing Software ..........................37...

  • Page 3: Unpacking And Assembling The Printer

    Note: If the printer is mounted on the optional 24” stand, the required clearance in front of the printer changes from 11.8 inches (300 mm) to 23.6 inches (600 mm). SureColor T5270/T7270 SureColor T5270D/T7270D When choosing a place for the printer, leave adequate room for easy access and ventilation. Avoid locations subject to direct sunlight, excessive heat, humidity, or dust.
  • Page 4 Unpacking and Assembling the Printer • SureColor T5270 - 185 lb (84 kg) • SureColor T7270 - 203 lb (92 kg) • SureColor T5270D - 260 lb (118 kg) • SureColor T7270D - 293 lb (133 kg) WARNING: Two people are required to unpack and install the SureColor T3070 printer; four people are recommended to unpack and install the SureColor T5070, T5270D, T7270, and T7270D printers.

  • Page 5: Setting Up The Surecolor T3270/T5270/T7270

    Setting up the SureColor T3270/T5270/T7270 SureColor T5270D/T7270D Setting up the SureColor T3270/T5270/T7270 Assembling the Stand Unpack the stand and make sure you have all of these items.
  • Page 6 Assembling the Stand Slide the horizontal strut into both of the legs as shown. Use the long end of the hex wrench to tighten the pre-placed screws on each side of the horizontal strut. Lock the casters to fix the stand in place. (When moving the printer, unlock the casters.)
  • Page 7 Mounting the Printer on the Stand You need at least two people (SureColor T3270) or four people (SureColor T5270/T7270) to install the printer and position it on the stand. When lifting the printer, only hold the areas shown below. Otherwise, damage may occur.
  • Page 8 Attaching the Paper Basket Attach the printer to the stand using three bolts. Attaching the Paper Basket The paper basket is a cloth sheet that attaches to the printer stand and catches your prints as they come out. You need the following parts to assemble and attach the paper basket: Attach the STABILIZERS as shown.
  • Page 9 Attaching the Paper Basket Insert a plastic connector into the end of one of the shorter square poles. Slide the pole through the holes in the STABILIZERS and attach the other plastic connector to the end of the pole. Then, fasten the plastic connectors in place on each side of the stand as shown. Attach the stack guides to the bottom of the printer.
  • Page 10 Attaching the Paper Basket Insert a plastic connector into the end of the second shorter square pole. Slide the pole through the holes in the stack guides and attach the other plastic connector to the end of the pole. Then, fasten the plastic connectors in place on each side of the stand as shown. Insert the two longer square poles into the right-hand basket arm.
  • Page 11 Attaching the Paper Basket Thread both poles through the paper basket. Insert the ends of the poles into the left-hand basket arm. Attach the two basket holders as shown, one on each side of the stand. Use four bolts to fasten the holders in place.
  • Page 12 Attaching the Paper Basket Insert a nut into the center bolt hole on the basket holder, and align the right-hand basket arm with the bolt hole. Insert the BOLT CHANNEL through the basket arm and into the bolt hole. Insert the bolt into the BOLT CHANNEL and tighten it.
  • Page 13 Attaching the Paper Basket Use two bolts to fasten the arm in place. Insert the longer arm into the rounded pole as shown. Insert the end of the rounded pole into the arm on the left side of the printer. Then, align the right basket arm with the mounting holes on the right-hand basket holder.
  • Page 14 Attaching the Paper Basket Use two nuts and two bolts to fasten the arm in place. Flip the loose end of the basket cloth over the top rail and feed it towards the back of the printer. On the back side of the printer, pull the paper basket up so that the stack guides fit into the slots as shown.

  • Page 15: Setting Up The Surecolor T5270D/T7270D

    Setting up the SureColor T5270D/T7270D Hook the loops on the sides of the basket to the pins on the back of the stand legs to secure the basket to the printer. On the front side of the printer, slide the basket’s fabric all the way to the ends of the rounded pole as shown.
  • Page 16 Assembling the Stand Slide the horizontal strut into both of the legs as shown. Use the long end of the hex wrench to tighten the pre-placed screws on each side of the horizontal strut. Lock the casters to fix the stand in place. (When moving the printer, unlock the casters.)
  • Page 17 Mounting the Second Paper Roll Mounting the Second Paper Roll Unpack the roll unit and make sure you have all of these items. Secure the roll supports to the legs of the stand using four bolts per support. Remove the tape from the mounting brackets and extend the left and right rail until you hear a click. Carefully place the second roll unit on the extended rails.
  • Page 18 Mounting the Second Paper Roll Caution: Placing the unit requires two people. Secure the unit to the rails with two bolts on each side.
  • Page 19 Mounting the Printer on the Stand Mounting the Printer on the Stand You need four people to install the printer and position it on the stand. When lifting the printer, only hold the areas shown below. Otherwise, damage may occur. Caution: Before installing the printer, lock the casters to make sure the stand is fixed in place.
  • Page 20 Mounting the Printer on the Stand Attach the printer to the stand using three bolts. Push the second roll unit underneath the printer. Push the cable guide into the back of the second roll unit.
  • Page 21 Attaching the Paper Basket Route the cables through the cable guide and connect them to the printer. Attaching the Paper Basket The paper basket is a cloth sheet that attaches to the printer stand and catches your prints as they come out.
  • Page 22 Attaching the Paper Basket Remove the bolts from the front of the printer stand and then open the rail covers. Insert the discs on the outside of the basket frame into the rails. Pivot the basket and close the rail cover. Replace the bolts.
  • Page 23 Attaching the Paper Basket Unwind the basket cloth from the frame. Open the clips on the basket, insert the loops as shown and close the clips. Hook the loops on the sides of the bottom of the basket to the notches on the stand.

  • Page 24: Connecting The Power Cord

    Connecting the Power Cord Hook the loops on the sides of the basket to the pins on the back of the stand legs to secure the basket to the printer. On the back side of the printer, pull the paper basket up so that the stack guides fit into the slots. Then, hook the loops around the pins on the back of the stack guides to hold the basket in place.

  • Page 25: Installing Ink Cartridges

    Installing Ink Cartridges Installing Ink Cartridges Use the ink cartridges that came with your printer for initial ink charging. During the initial installation process, it is normal for most of the ink in each cartridge to be used. Turn on the power and configure the initial settings, such as the language and date. Then, follow the instructions on the control panel to install the ink cartridges.

  • Page 26: Loading Roll Paper

    Loading Roll Paper Close the ink cover and wait for the ink to charge. The ink charging process takes about 25 minutes. Caution: Do not turn off the printer or open the ink cover when it is charging or you may waste ink. When the ink charging is completed, press and Load paper will be displayed on the control panel.
  • Page 27 Loading Roll Paper Open the roll paper cover. Raise the roll lock lever. Place the roll on top of the printer.
  • Page 28 If necessary, adjust the roll media adapters to fit the core size of the roll paper. 2-inch core 3-inch core 2-inch 3-inch Release the tension lever on both adapters. Push the adapters into the paper core at both ends of the roll. Press the adapters in until they are fully inserted into the roll.
  • Page 29 Loading Roll Paper Slide the roll paper all the way to the right until it lines up with the adapter guides. Press the button on the control panel. Confirm that is highlighted in the display, Roll Paper then press the button.
  • Page 30 Loading Roll Paper Use the roll paper adapters to push the paper straight through until the leading edge reaches the front of the printer. Lower the roll lock lever. Following the instructions on the control panel, press the button. The paper will be fed into the printer.
  • Page 31 Loading Roll Paper Close the roll paper cover. Check the message on the control panel. If the paper type was automatically detected, the printer will display on the LCD screen. • Ready The printer is ready to print. If the paper type was not detected, the printer will display the •...

  • Page 32: Loading Roll Paper Into The Secondary Roll Unit

    Loading Roll Paper into the Secondary Roll Unit Loading Roll Paper into the Secondary Roll Unit You can load a second roll of paper into the secondary roll unit of the SureColor T5270D and T7270D. Move the paper basket to the horizontal position by pulling the basket towards you, then lowering it. Push the paper basket in towards the printer.
  • Page 33 Loading Roll Paper into the Secondary Roll Unit Note: Unless instructed by the control panel, do not pull out the secondary roll unit. If the roll unit is pulled out carelessly while paper is loaded, it can cause paper jams or damage to the paper. Raise the roll paper lock lever, if necessary.
  • Page 34 Loading Roll Paper into the Secondary Roll Unit Insert the end of the roll paper into the paper slot and pull it through. Make sure the paper is free of slack and that the end is not folded. If roll paper is being inserted, you will hear a beep and the paper will be automatically loaded.
  • Page 35 Loading Roll Paper into the Secondary Roll Unit Lower the roll lock lever. Push the secondary roll unit back into the printer. Check the message on the control panel. If the paper type was automatically detected, the printer will display on the LCD screen.

  • Page 36: Performing A Test Print

    Performing a Test Print Performing a Test Print You can print a nozzle check from the control panel and examine it to determine whether any nozzles are clogged or deflected. Then you can run a cleaning cycle if necessary. Make sure the paper source and media type settings are correct for the type of paper loaded. Confirm that the printer is ready to print, then press the button on the control panel.

  • Page 37: Installing Software

    Plug the other end of the cable into the appropriate port on your computer or network switch or hub. Updating Your Printer Firmware To keep your printer features and functionality up to date, you should check for a new version of firmware on the Epson support site and update your printer, if necessary.
  • Page 38 If the firmware version of the file is newer than what is currently installed, click to start the Update firmware updating process. Caution: Don’t turn off the printer while the firmware is updating. When the update is complete, close the Firmware Updater window and EPSON LFP Remote Panel 2 window.

  • Page 39: Limited Warranty

    “Limited Warranty Coverage”. Coverage begins as of the date of delivery to the purchaser by Epson or by an authorized Epson dealer (see “Epson Subsidiaries and Offices in Latin America Technical Support Service”), in the country of purchase.
  • Page 40 Any activity related with the re-installation or resetting of the software that was delivered with the equipment, will be billed to the purchaser at the rates in effect at the Epson Service Center. This also applies if the failure was the result of a defect in the purchaser’s proprietary software or of a computer “virus”...
  • Page 41 If your country does not appear on the preceding list, please contact the dealer where you purchased the product. You may receive help or consult information on-screen for all Epson products. Register your Epson equipment on our website, at global.latin.epson.com/Soporte.
  • Page 42 Limited Warranty EPSON and SureColor are registered trademarks, and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners.

This manual is also suitable for:

Surecolor t7270Surecolor t5270dSurecolor t7270d

Table of Contents