Table of Contents
Advertisement
Procedure to move the solid-state drive holder
About this task
NOTE:
This computer supports only one M.2 slot for either an M.2 2230 solid-state drive or an M.2 2280 solid-state drive.
If you are replacing the solid-state drive of a different form factor other than the one removed, see the following procedure to
move the location of the solid-state drive holder.
Steps
1. Remove the solid-state drive holder from the palm-rest and keyboard assembly.
2. Turn the solid-state drive holder by 180 degrees.
3. Insert the solid-state drive holder into the other solid-state drive holder slot on the palm-rest and keyboard assembly.
4. To install an M.2 2230 solid-state drive, see
5. To install an M.2 2280 solid-state drive, see
Wireless card
Removing the wireless card
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
About this task
The following image indicates the location of the wireless card and provides a visual representation of the removal procedure.
installing M.2 2230 solid-state
installing M.2 2280 solid-state
Before working inside your
drive.
drive.
computer.
Removing and installing components
21
Advertisement
Table of Contents
