Table of Contents
Advertisement
Steps
Adhere the tape to secure the eDP cable to the display back cover.
Next steps
1. Install the
display
panel.
2. Install the
display
hinges.
3. Install the
display
bezel.
4. Install the
display
assembly.
5. Install the
3-cell battery
6. Install the
base
cover.
7. Follow the procedure in
Camera
Removing the camera
Prerequisites
NOTE:
The camera removal procedure is applicable only for Latitude 5330 laptop and not for the 2-in-1 configuration.
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
3-cell battery
4. Remove the
display
assembly.
5. Remove the
display
bezel.
6. Remove the
display
hinges.
7. Remove the
display
panel.
About this task
The following images indicate the location of the camera and provide a visual representation of the removal procedure.
Steps
1. Peel the conductive tape that secures the camera cable in place.
2. Lift the latch and disconnect the camera cable from the connector on the camera module.
100
Removing and installing components
or
4-cell
battery.
after working inside your
before working inside your
or
4-cell
battery.
computer.
computer.
Advertisement
Table of Contents
