Download Print this page

Remote Console Redirection - IBM xSeries 445 8870 User Manual

Hide thumbs Also See for xSeries 445 8870:

Table of Contents

Remote console redirection

From the Devices and I/O Ports choice, you can enable and configure the remote

console redirection through the Remote Console Redirection submenu. The

Devices and I/O Ports choice is on the full Configuration/Setup menu only.

Complete the following steps to enable and configure the remote console

redirection feature:

1. Ensure that you have installed and enabled the serial port that comes with your

2. From the Devices and I/O Ports choice, use the Up Arrow and Down Arrow

3. In the Remote Console Redirection window Enable the remote console

4. Once you have made the necessary changes, press Esc.

5. Select Save Settings; then, press Enter.

6. Confirm your selection; then, exit the Configuration/Setup Utility program.

7. Connect the server to a remote console using a null modem cable.

server. See "Installing the serial port" in the Installation Guide.

keys (↑ and ↓) to select Remote Console Redirection; then, press Enter. The

Remote Console Redirection window opens.

redirection and enter the necessary settings for the server to work with a remote

console.

Note: The remote console settings must match those in the Remote Console

Redirection window to ensure proper operation.

Chapter 2. Configuring the server

Table of Contents