Table of Contents
Advertisement
Steps
1. Insert the I/O board at a 45 degree angle into the slot on the system board.
2. Align the screw holes on the I/O board with the screw holes on the system board.
3. Install the two screws (M2x4) that secure the I/O board to the system board.
4. Turn the system board to the front and align the screw holes on the system board with the screw holes on the palm-rest and
keyboard assembly.
Next steps
1. Install the
system
board.
2. Install the
left
fan.
3. Install the
right
fan.
4. Install the
memory
module.
5. Install the
wireless
card.
6. Install the
solid-state drive
7. Install the
solid-state drive
8. Install the
rear cover
9. Install the battery.
10. Install the
base
cover.
11. Follow the procedure in
Speakers
Removing the speakers
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
solid-state drive
2.
1.
After working inside your
Before working inside your
2.
computer.
computer.
Removing and installing components
29
Advertisement
Table of Contents
