Table of Contents
Advertisement
21in Recycler
Model No. 21321—Serial No. 400000000 and Up
Introduction
This rotary-blade, walk-behind lawn mower is intended
to be used by residential homeowners. It is designed
primarily for cutting grass on well-maintained lawns on
residential properties. Using this product for purposes
other than its intended use could prove dangerous to
you and bystanders.
Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely.
Visit www.Toro.com for more information, including
safety tips, training materials, accessory information,
help finding a dealer, or to register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready.
identifies the location of the model and serial numbers
on the product. Write the numbers in the space
provided.
Important:
With your mobile device, you can
scan the QR code on the serial number decal (if
equipped) to access warranty, parts, and other
product information.
1. Model and serial number location
Model No.
Serial No.
© 2022—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
®
Figure 1
Figure 1
Register at www.Toro.com.
/Rear Bagging Lawn Mower
Safety-Alert Symbol
The safety-alert symbol
manual and on the machine identifies important safety
messages that you must follow to prevent accidents.
The safety-alert symbol appears above information
that alerts you to unsafe actions or situations and
is followed by the word DANGER, WARNING, or
CAUTION.
DANGER indicates an imminently hazardous situation
which, if not avoided, will result in death or serious
injury.
WARNING indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury.
CAUTION indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury.
This manual uses two other words to highlight
information. Important calls attention to special
mechanical information and Note emphasizes general
information worthy of special attention.
It is a violation of California Public Resource Code
Section 4442 or 4443 to use or operate the engine on
g283232
any forest-covered, brush-covered, or grass-covered
land unless the engine is equipped with a spark
arrester, as defined in Section 4442, maintained in
effective working order or the engine is constructed,
equipped, and maintained for the prevention of fire.
The enclosed engine owner's manual is supplied
for information regarding the US Environmental
Protection Agency (EPA) and the California Emission
Control Regulation of emission systems, maintenance,
and warranty. Replacements may be ordered through
the engine manufacturer.
Gross or Net Torque: The gross or net torque
of this engine was laboratory rated by the engine
manufacturer in accordance with the Society of
Form No. 3456-222 Rev A
Operator's Manual
(Figure
2) shown in this
Figure 2
Safety-alert symbol
*3456-222*
Original Instructions (EN)
Printed in Mexico
All Rights Reserved
g000502
Advertisement
Table of Contents
Related Manuals for Toro Recycler 21321
Summary of Contents for Toro Recycler 21321
-
Page 1: Introduction
DANGER indicates an imminently hazardous situation additional information, contact an Authorized Service which, if not avoided, will result in death or serious Dealer or Toro Customer Service and have the model injury. and serial numbers of your product ready. Figure 1... -
Page 2: Table Of Contents
Contents Automotive Engineers (SAE) J1940 or J2723. As configured to meet safety, emission, and operating requirements, the actual engine torque on this class Introduction ............... 1 of mower will be significantly lower. Please refer to Safety-Alert Symbol..........1 the engine manufacturer’s information included with Safety ............... -
Page 3: Safety
Safety General Safety This product is capable of amputating hands and feet and of throwing objects. Always follow all safety instructions to avoid serious personal injury or death. • Read, understand, and follow the instructions and warnings in this Operator’s Manual and on the machine and attachments before starting the engine. -
Page 4: Safety And Instructional Decals
Safety and Instructional Decals Safety decals and instructions are easily visible to the operator and are located near any area of potential danger. Replace any decal that is damaged or missing. decaloemmarkt Manufacturer's Mark 1. This mark indicates that the blade is identified as a part from the original machine manufacturer. -
Page 5: Setup
Setup Important: Remove and discard the protective plastic sheet that covers the engine and any other plastic or wrapping on the machine. Installing the Handle No Parts Required Procedure WARNING Folding or unfolding the handle improperly can damage the cables, causing an unsafe operating condition. -
Page 6: Installing The Recoil-Starter Rope In The Rope Guide
Attach the handle to the machine using the holes at the end of the handle (B of Figure Move the handle rearward to the operating position (C of Figure Ensure that the cables are routed to the outside of the handle (D of Figure Secure the knobs and carriage bolts to lock the handle into the operating position (E of Figure... -
Page 7: Adding Oil To The Engine
Adding Oil to the Engine No Parts Required Procedure Important: If the oil level in the engine is too low or too high and you run the engine, you may damage the engine. g222533 Figure 5... -
Page 8: Assembling The Grass Bag
Assembling the Grass Bag No Parts Required Procedure g407949 Figure 6... -
Page 9: Product Overview
Contact your Authorized Service Dealer or authorized Toro distributor or go to www.Toro.com for a list of all approved attachments and accessories. To ensure optimum performance and continued safety certification of the machine, use only genuine Toro replacement parts and accessories. -
Page 10: Operation
Operation – Avoid prolonged breathing of vapors. – Keep your hands and face away from the nozzle and the fuel-tank opening. Note: Determine the left and right sides of the machine from the normal operating position. – Keep fuel away from your eyes and skin. Before Operation Filling the Fuel Tank Before Operation Safety... -
Page 11: Checking The Engine-Oil Level
Checking the Engine-Oil Level Service Interval: Before each use or daily Important: If the oil level in the crankcase is too low or too high and you run the engine, you may damage the engine. g222533 Figure 9... -
Page 12: Adjusting The Cutting Height
Adjusting the Cutting Height WARNING Adjusting the cutting-height levers could bring your hands into contact with a moving blade and result in serious injury. • Shut off the engine and wait for all moving parts to stop before adjusting the cutting height. •... -
Page 13: Starting The Engine
• Wet grass or leaves can cause serious injury if discharge chute frequently for any wear or you slip and contact the blade. Avoid mowing in deterioration and replace them with genuine Toro wet conditions. parts when necessary. • Use extreme care when approaching blind... -
Page 14: Using The Self-Propel Drive
Using the Self-Propel Drive Note: The maximum self-propel-drive speed is fixed. To reduce the speed, increase the space Self-Propel Model Only between the self-propel-drive bar and the handle. • To disengage the self-propel-drive, release the • To engage the self-propel drive, pull the self-propel drive bar. -
Page 15: Bagging The Clippings
Operating Tips parts to stop, disconnect the wire from the spark plug, and examine the machine for damage. • For best performance, install a new Toro blade General Mowing Tips before the cutting season begins or when • Inspect the area where you will use the machine necessary. -
Page 16: After Operation
Cleaning under the Machine slower; then mow again at a lower setting for the best lawn appearance. If the grass is too long, the machine may plug and cause the engine to stall. Service Interval: After each use • Wet grass and leaves tend to clump on the yard For best results, clean under the machine soon after and can cause the machine to plug or the engine you have completed mowing. -
Page 17: Folding The Handle
Folding the Handle WARNING Folding or unfolding the handle improperly can damage the cables, causing an unsafe operating condition. • Do not damage the cables when folding or unfolding the handle. • If a cable is damaged, contact an Authorized Service Dealer. Important: Hold the handle while disengaging the handle knobs to avoid pinching your hands. -
Page 18: Maintenance
• To ensure optimum performance of the machine, Figure 16 use only genuine Toro replacement parts and accessories. Replacement parts and accessories 1. Spark-plug wire made by other manufacturers could be dangerous, and such use could void the product warranty. -
Page 19: Servicing The Air Filter
Servicing the Air Filter Service Interval: Every 25 hours/Yearly (whichever comes first)—Service the air filter; service it more frequently in dusty operating conditions. Lift the tab to open the air-filter cover (Figure 17). g186015 Figure 17 1. Tab g186326 Figure 18 Replace the air filter. -
Page 20: Replacing The Blade
through until the oil level on the dipstick Remove the blade, saving all mounting hardware is correct. (Figure 20). • If the oil level on the dipstick is too high, Install the new blade and all mounting hardware drain the excess oil until the oil level on the (Figure 21). -
Page 21: Storage
Preparing the Machine for Storage On the last refueling of the year, add fuel stabilizer (such as Toro Premium Fuel Treatment) to the fuel as directed on the label. Dispose of any unused fuel properly. Recycle it according to local codes or use it in your automobile. - Page 22 Notes:...
- Page 23 California Proposition 65 Warning Information What is this warning? You may see a product for sale that has a warning label like the following: WARNING: Cancer and Reproductive Harm—www.p65Warnings.ca.gov. What is Prop 65? Prop 65 applies to any company operating in California, selling products in California, or manufacturing products that may be sold in or brought into California.