Table of Contents
Advertisement
NOTICE
Incorrect mounting
The device can be damaged, destroyed, or its functionality impaired through improper
mounting.
• Before installing ensure there is no visible damage to the device.
• Make sure that process connectors are clean, and suitable gaskets and glands are used.
• Mount the device using suitable tools. Refer to the information in Technical specifications
3.2.1
Strong vibrations
Strong vibrations
Vibrations can influence the result of a measurement.
• The analyzer must therefore only be installed at a location which is free of vibration.
• Ensure that there is little vibration when using the device. The maximum vibrations must
Compact Operating Instructions in accordance with EN 61010-1 and EN 60079-0
Compact Operating Instructions, 09/2018, A5E45779389002-01
(Page 57).
CAUTION
not exceed 5 m/s².
Assembly/installation
3.2 Installation location requirements
25
Advertisement
Table of Contents
