Displaying The Settings In Your Camcorder (Status Check); Checking The Remaining Battery (Battery Info) - Sony HVR-Z7U Operating Manual
Digital hd video camera recorder
Hide thumbs
Also See for HVR-Z7U:
- Service manual (507 pages) ,
- Operating manual (146 pages) ,
- Brochure & specs (20 pages)
Table of Contents
Advertisement
Changing/checking the settings in your camcorder (Continued)
C Iris
appears in the iris value display
area during playback of the movie
recorded with the iris manually adjusted
to its maximum value.
D Gain
E Shutter speed
F White balance
appears during playback of the
movie recorded with the shot transition
or [MANU WB TEMP].
b Notes
• The exposure correction value (0EV), shutter
speed and iris will be displayed during viewing
of still images on "Memory Stick Duo."
• Date and time will be displayed in the same area
when you select the date and time display. If
you record without setting date and time, [--- --
---- ] and [--:--:--] will be displayed.
• An accurate shutter speed may not be displayed
when you play back a tape recorded with your
camcorder on another device. Check the data
code that is displayed on the screen when you
play back the tape on your camcorder for the
accurate shutter speed.
• A shutter speed is indicated with [---] during
playback of the movie recorded with the
extended clear scan (
Displaying the settings in your
camcorder (Status check)
You can check the settings of the following
items.
• Audio setup such as microphone volume level
(p. 75)
• Output signal setup ([VCR HDV/DV], etc.)
(p. 82)
• Functions assigned to the ASSIGN buttons
(p. 43)
• Camera setup (p. 68)
• External devices
54
).
1
Press the STATUS CHECK button
C.
2
Turn the SEL/PUSH EXEC dial D
until a desired display shows up
on the screen.
When the POWER switch E is set to
CAMERA, the display changes in the
following sequence:
AUDIO t OUTPUT t ASSIGN t
CAMERA t EXT DEVICE (when an
external device is connected)
When the POWER switch E is set to
VCR, the display changes in the
following sequence:
AUDIO t OUTPUT t ASSIGN t
EXT DEVICE (when an external device
is connected)
To hide the display
• Press the STATUS CHECK button C.
Checking the remaining battery
(Battery Info)
Set the POWER switch E to OFF, then
press the DISPLAY/BATT INFO button
A. The approximate recordable time in the
selected format and battery information
appear for about 7 seconds. You can view
the battery information for up to 20 seconds
by pressing the button again while the
information is displayed.
Remaining battery (approx.)
Recording capacity (approx.)
60
65
Advertisement
Table of Contents
