Table of Contents
Advertisement
Removing the Stand
― Before removing the stand from the product, place the product on a flat and stable surface with the screen
facing down.
― The exterior may differ depending on the product.
― The table should be relocated, depending on the space where the stand will be installed.
1
Turn the clamp on the stand, installed on the
table, to the left to disengage the lock.
― If you turn it to the right, the lock will be engaged.
5
Remove the Cover-Clean Back Stand.
2
Remove the stand from the table by holding the
stand and the bottom of the product.
6
Remove the screws on the stand.
Caution
Do not press down on the product. There is a risk
of damaging the product.
3
Make sure the product front faces down, as shown
in the figure.
Before placing the product facing down to the
table, put a cushion on the table to protect the
product screen.
4
Remove the connected cables.
21
Advertisement
Table of Contents
