Table of Contents
Advertisement
Memory modules
Removing the memory modules
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
About this task
The following images indicate the location of the memory modules and provides a visual representation of the removal
procedure.
Steps
1. Gently pry the securing-clips on each end of the memory-module slot until the memory module pops up.
2. Lift at an angle and remove the memory module from its slot on the system board.
3. Repeat the above procedure for the second memory module.
Installing the memory modules
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following images indicate the location of the memory modules and provides a visual representation of the installation
procedure.
Before working inside your
computer.
Removing and installing components
37
Advertisement
Table of Contents
