en - Technical data
Possible voltage variants
3N AC 400 V, 50 Hz
Supply voltage
Frequency
Power rating
Fuse rating (on site)
Minimum cross-section for connection cable
Peak-load negotiation (optional)
Supply voltage for control contacts
Minimum cross-section for connection cable
Miele recommends using a flexible connection cable with an additional isolation option to establish the connection. The isolator should
remain visible once the tumble dryer has been installed and must be freely accessible.
Condensate drainage
Condensate connector on machine side (external diameter)
The tumble dryer with heat pump operates according to the principle of condensation. The condensate that accumulates must be
drained away separately via a floor drain. The water can be routed to the floor drain via a hose or pipe pointing downwards.
Machine data
Machine width, total
Machine height, total
Machine depth, total
Net width of heat pump module
Net height of heat pump module
Net depth of heat pump module
Niche width
Recommended wall spacing (up to the front edge of the machine)
Minimum wall spacing (up to the back edge of the lid)
Packaging width
Packaging height
Packaging depth
Maximum gross volume
Maximum gross weight
Maximum net weight
Net weight of heat pump module
Max. floor load in operation
Drum diameter
Diameter of drum opening
Drum depth
Drum volume
Diameter of door opening
Maximum door opening angle
Emission sound pressure level
Sound power level
Average heat dissipation rate into the room
20
Standard connection
3N AC 400 V
50 Hz
5.1 kW
3×16 A
5×2.5 mm²
AC 230 V
5×1,5 mm²
30 mm
906 mm
1400 mm
1415 mm
906 mm
1400 mm
426 mm
1250 mm
1900 mm
500 mm
1090 mm
1526 mm
1925 mm
3201.9 l
183.3 kg
169.5 kg
168.4 kg
1928 N
850 mm
520 mm
613 mm
325 l
520 mm
180°
53 dB(A) re 20 µPa
62
4.5 MJ/h