WARNING:
TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOIS-
TURE.
IMPORTANT NOTICE
The serial number for this equipment is located on the
bottom plate. Please write this serial number on your
enclosed warranty card and keep it in a secure area. This
is for your security.
[For Canadian model]
CAUTION:
TO PREVENT ELECTRIC SHOCK DO NOT
USE THIS (POLARIZED) PLUG WITH AN EXTENSION
CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE
BLADES CAN BE FULLY INSERTED TO PREVENT BLADE
EXPOSURE.
ATTENTION:
POUR PREVENIR LES CHOCS ELEC-
TRIQUES NE PAS UTILISER CETTE FICHE POLARISEE
AVEC UN PROLONGATEUR, UNE PRISE DE COURANT
OU UNE AUTRE SORTIE DE COURANT, SAUF SI LES
LAMES PEUVENT ETRE INSEREES A FOND SANS EN
LAISSER AUCUNE PARTIE A DECOUVERT.
FEATURES
7 3-band beat effector function
The highly acclaimed auto BPM counter/beat effect
in DJM-500 has been substantially improved. Effects
can now be applied only to the sound in the selected
band and be adjusted in time with the tempo (BPM)
of the tune. This provides greater means of expres-
sion than the previous effector that operated across
the entire band.
7 DIGITAL JOG BREAK function
The jog dial gives you real-time control over the
sound effects. Eight seconds of jog operation is
stored to allow replay. A total of 25 effects including
a beat effect are provided.
7 High-performance 3-band Isolator
Function [Fourth-order filter
(-24 dB/oct.)]
Level control is possible between +6 dB to -
separation of up to -24 dB/oct. for each band ensure
accurate sound reproduction.
7 Input and Effect Out Peak Level
Monitor
Since both input and effect output levels can be visu-
ally assessed, precise level settings can be made with-
out any time loss.
7 MIDI In/Out Function
External MIDI signals (timing clock signals) make it pos-
sible to synchronize the beat effector and convert BPM
values that have been manually set or automatically
measured from the music to MIDI timing clock signals
to operate external sequencers or similar instruments.
7 High-quality Design
The effector uses 20-bit A/D, D/A (48 kHz sampling) con-
version and 24-bit DSP.
CAUTION:
shielded cables and connectors are used to connect the
unit to other equipment. To prevent electromagnetic inter-
ference with electric appliances such as radios and televi-
sions, use shielded cables and connectors for connections.
[For Canadian model]
This Class B digital apparatus meets all requirements of
the Canadian Interference-Causing Equipment Regulations.
[Pour le modèle Canadien]
Cet appareil numérique de la Classe B respecte toutes les
exigences du Règlement sur le matériel brouileur du
Canada.
Information to User
Alteration or modifications carried out without appropri-
ate authorization may invalidate the user's right to oper-
ate the equipment.
BLOCK DIAGRAM
INPUT
ISO-
LATOR
BEFORE USE
FEATURES ............................................................. 3
and a
SOUND EFFECTS ................................................. 6
CONNECTIONS .................................................... 8
ISOLATOR ........................................................... 13
BEAT EFFECT ...................................................... 14
JOG MEMORY .................................................... 17
MIDI SETTINGS .................................................. 18
TROUBLESHOOTING AND
SPECIFICATIONS ................................................ 19
This product satisfies FCC regulations when
DIGITAL
BEAT
JOG
EFFECT
BREAK
CONTENTS
................................................. 12
OUTPUT
PHONES
3
<DRB1237>
En