Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Asus ROG Flow X13 Series
Summary of Contents for Asus ROG Flow X13 Series
- Page 1 ASUS ROG Flow X13 (GV301Q) Series Service Guide...
- Page 2 LIMITATION OF LIABILITY Circumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to recover damages from ASUS. In each such instance, regardless of the basis on which you are entitled to claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death) and damage to real property and tangible personal property;...
- Page 3 Disclaimer ASUS is not responsible for direct, indirect, intentional or unintentional damages resulting from improper installation and operation. Safety precautions • Keep liquids or moisture away from your Notebook PC before installing or removing any components. • Ensure to place your Notebook PC on a stable surface before installing or removing any components.
-
Page 4: Table Of Contents
Table of Contents ⚫ Service Overview ⚫ ASUS ROG Flow X13 (GV301Q) Series Overview ⚫ Components Top View ⚫ Components Bottom View ⚫ Repair Overview ⚫ Appropriate Tools ⚫ Keyparts and Related Parts ⚫ Disassembly Steps : • BOTTOM CASE •... -
Page 5: Service Overview
Service Overview • Carefully read through this Service Guide for a look at various components of the device before performing any service and repairs. • To provide the best service, we have provided the below information for technicians from distributors and resellers to perform the complete device disassembly and assembly. -
Page 6: Asus Rog Flow X13 (Gv301Q) Series Overview
ASUS ROG Flow X13 (GV301Q) Series Overview Top View Bottom View ❶ Array microphones ❶ Air vents ❷ Camera indicator ❷ Audio speakers ❸ Camera ❸ compartment cover ❹ 360 ͦ - adjustable touch screen panel ❺ Capital lock indicator ❻... -
Page 7: Components Top View
Components Top View BOTTOM CASE SPEAKER WIFI ANTENNA LCD COVER MODULE TOUCH CABLE BATTERY LCD Panel MAIN BOARD THERMAL MODULE ASSY FP TOUCH MODULE CAMERA ARRAYMIC CR CAM FPC MIC RUBBER TP FFC LCD BEZEL VGA FAN CPU FAN POWER KEY BKT HINGE L HINGE CAP L HINGE R... - Page 8 Components Top View TOP ACETATE CLOTH MB USB ABSORBER THERMAL SSD PAD 2 THERMAL SSD PAD 1 TOP SPK ACETATE CLOTH HINGE RUBBER GC CONNECTOR RUBBER HING MYLAR Back...
-
Page 9: Components Bottom View
Components Bottom View KEYBOARD MODULE THERMAL MODULE ASSY 15’6 LCD CAM FPC BOTTOM CASE LCD COVER MODULE LCD BEZEL HALL SENSOR BOARD MAIN BOARD BEZEL ADHESIVE TOUCH PAD LCD BEZEL ADHESIVE Back... -
Page 10: Repair Overview
Repair Overview This chapter describes disassembly and assembly (Assemble document please look up from the last page), please follow the information provided in this section to perform the complete disassembly procedure. Precautions: Before you perform any service or repair on the notebook, please pay special attention to the cautions prevent any damages to the notebook. 1. -
Page 11: Appropriate Tools
Appropriate Tools Please prepare and select the appropriate tools to disassemble/assemble for the ASUS ROG Flow X13 (GV301Q) Series notebook. Screwdriver Alcohol 95% Glove Dust-free Cloth Please accord to different screw specification to choose different screwdriver and head. Plastic Blade Thermal Pad PTM7958 PLASTIC CARD T=0.35mm... - Page 12 Appropriate Tools Please prepare and select the appropriate tools to disassemble/assemble for the ASUS ROG Flow X13 (GV301Q) Series notebook. ❽ ❾ ❿ ⓬ ❺ ❶ ❸ ❻ ❼ ⓫ ❷ ❹ ⓭ Tooling Type Item Part Name Memo ❶...
-
Page 13: Bottom Case
BOTTOM CASE Disassembly Notice Step 1 : Remove screws *11pcs. Step 2 : Use plastic blade to pry the bottom case. Screws Spec Torque (kgf-cm) M2*8L (3.7,0.55) (K) #1 2.0±0.2 M2*7L (3.7,0.55) (K) #1 2.0±0.2 M2*3L (3.5,0.5) (K) #1 2.0±0.2 Start To avoid the bottom case hook, Please follow above arrow direction... -
Page 14: Battery
BATTERY Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Before disassembly battery connector, please be sure to pull out adapter and disconnect the battery more than ten seconds in order to IC damage. Screws Spec Torque (kgf-cm) Step 1 : Disconnect the battery connector. -
Page 15: Ssd
Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Step 1 : Remove the screw *1pcs. Step 2 : Remove SSD. Screws Spec Torque (kgf-cm) M2*3.5L(4.5,0.5)(K) B-ZN 2.0±0.2 Remove (SSD) Back... -
Page 16: Speaker
SPEAKER Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Step 1 : Disconnect SPEAKER connector (Yellow mark). Step 2 : Release tape. Assembly Notice Step 3 : Remove SPEAKER. For Speaker assembly, please follow the mark below to tidy cable and tape. Disconnect (Yellow mark) Tape Remove... -
Page 17: Fp Touch Module(With Main Board、Thermal Module & Fan)
FP TOUCH MODULE (with Main Board、Thermal Module & Fan) Assembly Notice Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Step 1 : Release tapes (Green & Blue mark) *3pcs. If FFC is damage during disassembly, please replace Step 2 : Disconnect connector (Yellow mark) *7pcs. -
Page 18: Thermal Module & Fan
THERMAL MODULE & FAN Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Step 1 : Please follow the reverse screw numbers to remove screws *8pcs, and release Mylar 3*pcs behind Main-board, then remove Thermal Module from Main-board. Step 2 : Release FAN connector *2 pcs, and release FAN ACETATE CLOTH *1pc. - Page 19 THERMAL MODULE & FAN Assembly Notice Please be sure to pull out adapter and disconnect the battery. Step-1 For CPU FAN assembly, please follow below direction THERMAL MODULE Location:[VRAM/CHOKE/MOS] to paste FAN ACETATE CLOTH. Material: FCR-AS Grease *Please cover fan cable, but not fan connector MB Location:[GPU] Material: TH PAD PTM7958 Step-2...
-
Page 20: Main Board
MAIN BOARD Mainboard connector placement EDP CABLE TOUCH Cable CPU FAN POWER Key SPEAKER TP FFC KB BL FPC K/B FPC Supports using JIG BOARD to refresh F1 BIOS. Back... - Page 21 MAIN BOARD Materials on mainboard G531GW X50 TI GPU MYLAR|SUNYIEH GV301QE CPU FOAM GV301QE MB TOP FOAM L GV301QE MB BOSS MYLAR|SUNYIEH GV301QE GPU BKT ASSY GV301QE MB TOP FOAM S GV301QE GPU ABSORBER|LONGYANG GV301QH THERMAL SSD PAD 1 GV301QE CPU BKT ASSY GV301QE MB HDMI AL FOIL GV301QE CPU ABSORBER|LONGYANG Back...
-
Page 22: Keyboard Module
KEYBOARD MODULE Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Step 1 : Disconnect connector (Yellow mark). Screws Spec Torque (kgf-cm) Step 2 : Remove TP FFC CABLE. Step 3 : Remove screws *3pcs, and remove TOUCH PAD. M2*2L (4.5,0.5) (K) #1 1.8±0.2 Step 4 : Remove WIFI ANTENNA. - Page 23 KEYBOARD MODULE Assembly Notice Please be sure to pull out adapter and disconnect the battery. When assembly the KEYBOARD Module, please follow the yellow mark to tidy When assembly the WIFI ANTENNA, please follow mark to tidy cable and tapes. cable and ACETATE Cloth.
-
Page 24: Lcd Bezel
LCD BEZEL Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Step 1 : Use plastic blade to pry the LCD BEZEL. Assembly Notice Step 2 : Disconnect connector (Yellow mark) *3pcs. Step 3 : Remove TOUCHPANEL CONTROLLER BD and TOUCH Cable. Step 1, When reuse the BEZEL, please follow below location to paste BEZEL ADHESIVE *2pcs. -
Page 25: Lcd Panel
LCD PANEL Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Step 1 : Pull out LCD adhesive *2pcs. Due to some adhesive behind the lower edge of panel, please using plastic blade to Step 2 : Using plastic blade to separate and teardown the panel. separate and teardown the panel at below location.. - Page 26 LCD PANEL Assembly Notice Please be sure to pull out adapter and disconnect the battery. When reuse the LCD PANEL or LCD Cover: When assembly the BEZEL: Please use the fingertip to clean the residual adhesive on back side of PANEL Please follow below order to install and click BEZEL.
- Page 27 LCD PANEL Assembly Notice Please be sure to pull out adapter and disconnect the battery. When reuse the LCD COVER: When assembly the LCD PANEL: Please paste below new ADHESIVE *13pcs on LCD COVER. Step 1 : Remove release paper of LCD Adhesive *12pcs. (New LCD COVER already contains those ADHESIVE *11pcs (Yellow and Red Step 2 : Assembly and align the LCD to the upper side of the LCD Cover.
-
Page 28: Lcd Cover
LCD COVER Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Step 1 : Remove screws *6pcs, and then remove HINGE with HINGE CAP. Screws Spec Torque (kgf-cm) Step 2 : Remove screws *2pcs, and then remove HINGE CAP *2pcs. Step 3 : Remove CAM FPC. - Page 29 LCD COVER Assembly Notice Please be sure to pull out adapter and disconnect the battery. For CAM FPC assembly, please follow the mark below to fix FPC. When assembly the HINGE Rubber, please follow the location below to fix Rubber. *Do not cross the upper Frame.