Table of Contents
Advertisement
Installing Memory
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product
Information Guide.
NOTICE:
To avoid electrostatic discharge and damage to internal components, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface on the computer chassis.
1 Follow the procedures in "Before You Begin" on page 85.
2 Remove the computer cover (see "Removing the Computer Cover" on page 86).
3 Press out the securing clip at each end of the memory module connector.
1
memory connector closest to
processor
4 Align the notch on the bottom of the module with the crossbar in the connector.
1
cutouts (2)
4
crossbar
92
Removing and Installing Parts
1
2
securing clips (2)
3
2
1
2
memory module
2
3
3
memory connector
4
3
notch
- Quick Links:
- Diagnostic Lights
- System Board Components
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
