Related Manuals for Sony KLV-26S400A - 26" Multi-System HDTV LCD TV
Summary of Contents for Sony KLV-26S400A - 26" Multi-System HDTV LCD TV
- Page 1 LCD Colour TV Operating Instructions KLV-40S400A KLV-37S400A KLV-32S400A KLV-26S400A 3-876-548-11(2) © 2008 Sony Corporation 3-876-548-11(2)
-
Page 2: Trademark Information
Introduction Trademark information Thank you for choosing this Sony product. • HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of Before operating the TV, please read this manual HDMI Licensing LLC. thoroughly and retain it for future reference. -
Page 3: Table Of Contents
Table of Contents Using MENU Functions Start-up Guide Navigating through menus......19 Checking the accessories ......4 Using the Favourite List ......20 Inserting batteries into the remote....4 Settings adjustment ........21 1: Attaching the stand ......... 4 Picture menu ........... 23 Sound menu .......... -
Page 4: Start-Up Guide
Start-up Guide Checking the 1: Attaching the stand accessories AC power cord* (KLV-40S400A only) Stand (1) and screws (3) Remote RM-GA011 (1) Size AA batteries (R6 type) (2) * For models with ferrite cores, do not remove these cores. Inserting batteries into the remote Push and lift the cover to open. -
Page 5: 2: Connecting An Antenna/Cable/Vcr
2: Connecting an 3: Preventing the TV antenna/cable/VCR from toppling over Connecting an antenna/cable Antenna cable (not supplied) Connecting an antenna/cable and VCR Install a wood screw (4 mm in diameter, not supplied) in the TV stand. Install a machine screw (M5 x 12, not supplied) into the screw hole of the TV. -
Page 6: 4: Bundling The Cables
4: Bundling the cables 6: Performing the initial set-up BRAVIA Sync SYNC MENU THEATRE AUDIO 5: Connecting the AC power cord 3, 4, 5, 6, 9, 10, 11 RETURN TOOLS Selecting the language Connect the TV to your AC power outlet KLV-40S400A KLV-37/32/26S400A (110-240 V AC, 50/60 Hz). -
Page 7: Auto-Tuning The Tv
Press to select the language displayed When the “Programme Sorting” menu on the menu screens, then press appears on the screen, follow the steps of “Programme Sorting” (page 30). If you do not change the order in which the channels are stored on the TV, go to step 8. -
Page 8: Watching Tv
TV, especially to determine the strength of the wall for withstanding the TV’s weight. For product Front protection and safety reasons, Sony strongly recommends that you use the Wall-Mount Bracket model designed for your TV and the wall- mounting of your TV should be performed by... -
Page 9: Safety Information
• Two or more people are needed – Use only Sony supplied AC power cords, not those of to transport a large TV set. other brands. • When transporting the TV set by –... -
Page 10: Precautions
TV set from moving or slipping off from immediately if any of the following problems occur. its table stand. Ask your dealer or Sony service centre to have it checked by qualified service personnel. Optional Equipment... -
Page 11: Overview Of The Remote
TOOLS • Control for HDMI (BRAVIA Sync) is only available with the connected Sony equipment that has the BRAVIA Sync logo or is compatible with control for HDMI. • If you turn the TV off, Theatre Mode is also turned off. - Page 12 – Favourite list Displays the Favourite list that you have specified (page 20). qs PROG +/–/ BRAVIA Sync • Selects the next (+) or previous (-) channel. • In Text mode: Selects the next ( ) or previous ( ) page. SYNC MENU THEATRE –...
-
Page 13: Using The Tools Menu
For PC Input Full 1 Stretches the original picture to fill the screen vertically. Full 2 Stretches the Full 1 picture horizontally to fill the 16:9 screen. Using the Tools menu Press TOOLS enables you to access various viewing options and change/make adjustments according to the source and screen mode. -
Page 14: Overview Of The Tv Buttons And Indicators
Overview of the TV buttons and indicators Displays or cancels the menu. – Input select / OK • Displays the connected equipment list and selects the input source (page 16). • In TV menu: Selects the menu or option, and confirms the setting. -
Page 15: Using Optional Equipment
Using Optional Equipment Connecting optional equipment You can connect a wide range of optional equipment to your TV. For service use only Audio system DVD player PC (HDMI output) S VHS/Hi8/ camcorder Blu-ray disc player Headphones Digital video camera Hi-Fi audio equipment DVD player with component video output Video game equipment... -
Page 16: Viewing Pictures From The Connected Equipment
~ • The HDMI jacks only support the following video inputs: 480i, 480p, 576i, 576p, 720p (50/60 Hz), 1080i (50/60 Hz), 1080p (50/60 Hz) and 1080/24p. • Be sure to use only an HDMI cable that bears the HDMI logo (recommended Sony HDMI cable). -
Page 17: Viewing Twin Picture
Viewing Twin Picture Viewing PIP (Picture in Picture) You can view two pictures (external input and TV programme) on the screen simultaneously. Connect the optional equipment (page 15), and make You can view two pictures (PC input and TV sure that images from the equipment appear on the programme) on the screen simultaneously. -
Page 18: Using Bravia Sync (Control For Hdmi)
• Adjusts the volume (2 +/–) and mutes the sound (%) of a connected audio system. • You can operate the connected Sony equipment that has the BRAVIA Sync logo by the TV remote by pressing: –... -
Page 19: Using Menu Functions
Using MENU Functions Navigating through menus “MENU” allows you to enjoy various convenient features of this TV. You can easily select channels or inputs sources and change the settings for your TV. BRAVIA Sync Press MENU. Press to select an option, then press SYNC MENU THEATRE AUDIO... -
Page 20: Using The Favourite List
Using the Favourite List The Favourite feature lets you select programmes from a list of up to 16 favourite channels that you specify. Press MENU. Press to select “Favourites”, then press Perform the desired operation as shown in the following table or displayed on the screen. -
Page 21: Settings Adjustment
Settings adjustment You are able to change the settings of your TV from “Settings” menu. F/f to select “Settings”, then press Press MENU. Press Press F/f to select a menu icon, then press Press F/f/G/g to select an option or adjust a setting, then press The following is an overview of the items that can be adjusted. - Page 22 Set-up menu (page 26) Set-up “Auto Start-up” Auto Start-up Language English “Language”: “English” t “ ” (Chinese) t “ ” (Thai) t “ ” Cinema Drive AV Set-up (Arabic) t “ ” (Persian) HDMI Set-up Timer Settings “Cinema Drive”: “Auto” t “Off” Standard Power Power Saving Light Sensor...
-
Page 23: Picture Menu
Picture menu Press MENU and select “Settings”. Make sure the “Picture” icon ( ) is selected, then press Picture Mode Selects the picture mode except for PC input source. “Vivid”: For enhanced picture contrast and sharpness. “Standard”: For standard picture. Recommended for home entertainment. “Cinema”: For optimum picture quality of film videos. -
Page 24: Sound Menu
Sound menu Press MENU and select “Settings”. Press to select the “Sound” icon ( ), then press Sound Mode “Dynamic”: Enhances treble and bass. Recommended for home entertainment. “Standard”: For standard sound. “Clear Voice”: Makes voice sound clearer. Reset Resets all the “Sound” settings except “Sound Mode” and “Dual Sound” to the factory settings. - Page 25 Dual Sound Selects the sound from the speaker for a stereo or bilingual broadcast. The selection varies, depending on the Broadcasting. Broadcasting Selection NICAM stereo Stereo (stereo sound) Mono (regular sound) NICAM bilingual Main (main sound) Sub (sub sound) Mono (regular sound) NICAM monaural Main (main sound) Mono (regular sound)
-
Page 26: Set-Up Menu
Display Area Adjusts the screen area for displaying the picture. “Full Pixel”: Displays the picture for 1080/50i, 1080/60i, 1080/50p and 1080/60p (KLV-40S400A only) sources (HDMI or component input only) or 1080/24p sources (HDMI input only) in the original size when parts of the picture are cut off. “Normal”: Displays the recommended picture area. - Page 27 HDMI. When set to “On”, the following menu items can be performed. If the specific Sony equipment that is compatible with control for HDMI is connected, this setting is applied to the connected equipment automatically when the “Control for HDMI”...
-
Page 28: Pc Settings Menu
Timer Settings Sets the timer to turn on/off the TV. Sleep Timer Sets a period of time after which the TV automatically switches itself into standby mode. When the “Sleep Timer” is activated, the (Timer) indicator on the TV front panel lights up in amber. - Page 29 Phase Adjusts the phase when the screen flickers. Pitch Adjusts the pitch when the picture has unwanted vertical stripes. Horizontal Shift Adjusts the horizontal position of the picture. Power Management Switches the TV to standby mode if no signal is received for 30 seconds. PC Input Signal Reference Chart for supported signals and “Resolution:”...
-
Page 30: Channel Set-Up Menu
Channel Set-up menu Press MENU and select “Settings”. Press to select the “Channel Set-up” icon ( ), then press 1 Digit Direct When “1 Digit Direct” is set to “On”, you can select a channel using one preset number button (0 - 9) on the remote. ~ •... - Page 31 Manual Programme Before selecting “Label”/“AFT”/“Audio Filter”/“Skip”/“Colour System”/“Signal Booster”, press PROG +/- to select the programme number with the channel. You Preset cannot select a programme number that is set to “Skip” (page 31). Programme/TV System/VHF or UHF Presets programme channels manually. Select “Programme”, then press Press to select the programme number you want to manually tune...
-
Page 32: Additional Information
Additional Information Specifications Model name KLV-40S400A KLV-37S400A KLV-32S400A KLV-26S400A System Panel System LCD (Liquid Crystal Display) Panel TV System B/G, I, D/K, M Colour System PAL, PAL60, SECAM, NTSC4.43, NTSC3.58 Channel Coverage B/G: VHF: E2 to E12/ UHF: E21 to E69/ CATV: S01 to S03, S1 to S41 VHF: 0 to 12, 5A, 9A/ UHF: 28 to 69/ CATV: S01 to S03, S1 to S44 (Australia only) VHF: 1 to 11/ UHF: 21 to 69/ CATV: S01 to S03, S1 to S41 (New Zealand only) UHF: B21 to B69/ CATV: S01 to S03, S1 to S41... -
Page 33: Troubleshooting
If you find any problem while viewing your TV, you can either check the Troubleshooting guide below or use the “Factory Settings” function (page 28). If the problem persists, contact your Sony dealer. Check whether the 1 (standby) indicator is flashing in red. - Page 34 • The antenna connection is loose or the antenna cable is damaged. Check the cable and connection on the TV, VCR, and on the wall (page 5). switches on and off, or is • Adjust the antenna direction for the minimum interference. Contact a Sony dealer distorted; the sound switches for advice.
- Page 35 • The antenna connection is loose or the antenna cable is damaged. Check the cable and connection on the TV, VCR, and on the wall (page 5). • Adjust the antenna direction. Contact a Sony dealer for advice. • Signal transmission is too low. Try using a booster.
- Page 36 Customer support Printed in Vietnam...