Display Assembly; Prerequisites; Removing The Display Assembly - Dell Studio XPS 13 - Laptop - Obsidian Owner's Manual
Owner's manual (pdf)
Hide thumbs
Also See for Studio XPS 13 - Laptop - Obsidian:
- Setup manual (74 pages) ,
- Service manual (41 pages)
Table of Contents
Advertisement
Display Assembly
WARNING:
Before working inside your computer, read the safety information that
shipped with your computer and follow the steps in "Before You Begin" on page 9.
For additional safety best practices information, see the Regulatory Compliance
Homepage at dell.com/regulatory_compliance.
Prerequisites
1 Remove the base cover. See "Removing the Base Cover" on page 13.
2 Remove the power-light board.
See "Removing the Power-Light Board" on page 15.
3 Remove the battery. See "Removing the Battery" on page 17.
4 Remove the speakers. See "Removing the Speakers" on page 19.
Removing the Display Assembly
1 Disconnect the display cable from the system-board connector.
1
display cable
15
Display Assembly
1
53
Advertisement
Table of Contents
