Table of Contents
Advertisement
xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
System Contact
Click the Apply button to implement changes made.
Port Configuration
Port Settings
This page used to configure the details of the switch ports.
To view the following window, click System Configuration > Port Configuration > Port Settings, as show below:
To configure switch ports:
1. Choose the port or sequential range of ports using the From Port and To Port drop-down menus.
2. Use the remaining drop-down menus to configure the parameters described below:
The fields that can be configured are described below:
Parameter
Unit
From Port / To Port
State
Speed/Duplex
Enter a contact name for the Switch, if so desired.
Figure 2-3 Port Settings window
Description
Select the unit you wish to configure.
Select the appropriate port range used for the configuration here.
Toggle the State field to either enable or disable a given port or group of ports.
Use the drop-down menu to select the speed in Auto, 10M Half, 10M Full, 100M Half,
100M Full, 1000M Full_Master and 1000M Full_Slave. Auto denotes auto-negotiation
10
Advertisement
Table of Contents
