Table of Contents
Advertisement
Networking
If the printer is currently set up locally (using USB connection)
1
Click
or Start.
2
Click All Programs or Programs, and then select the printer program folder from the list.
3
Select your printer, and then navigate to:
Printer Home > Settings > Wireless setup utility
4
Follow the instructions on the computer screen.
Note: There is no need to remove the USB cable connecting the printer to the computer during wireless
configuration.
If the printer is currently set up for Ethernet
1
Unplug the Ethernet cable from the printer.
2
Place the printer close to the computer you want to use to configure the printer for wireless access.
Note: You will need to connect the printer to the computer with a USB cable. Make sure the printer is close
enough to the computer for your USB cable to reach both.
3
Click
or Start.
4
Click All Programs or Programs, and then select the printer program folder from the list.
5
Select your printer, and then navigate to:
Printer Home > Settings > Wireless setup utility
6
Follow the instructions on the computer screen.
Using the printer locally (USB)
Select the connection type that describes how you currently access your printer:
If the printer is currently set up for Ethernet
1
Attach a USB cable to the computer and to the printer.
2
Wait a moment for Windows to locate the driver and finish setting up the printer.
3
Select the USB printer. See "Selecting a printer" on page 107.
If the printer is currently set up for wireless
1
Attach a USB cable to the computer and to the printer.
2
Wait a moment for Windows to locate the driver and finish setting up the printer.
3
Select the USB printer. See "Selecting a printer" on page 107.
Note: You can continue to use the printer through Ethernet or wireless connection.
Using the printer over an Ethernet network
Select the connection type that describes how you currently access your printer:
106
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
