Table of Contents
Advertisement
Faxing
From here
2‑Sided Faxes
Dialing and Sending
Fax Blocking
Configuring fax settings using the fax software
Before you begin, make sure that:
•
The printer is properly connected to the telephone line.
•
The printer is turned on and connected to the computer.
•
The printer is not in Sleep mode. If the printer is in Sleep mode, then press
Using the Fax Setup Wizard in Windows
1
Click
or Start.
2
Click All Programs or Programs, and then select the printer program folder from the list.
3
Click Printer Home > Fax > Set up the printer to fax.
The Fax Setup Wizard opens.
4
Run the Fax Setup Wizard. Make sure you select the correct telephone service and connection. The wizard configures
optimal fax settings based on your connection.
Note: If you want to configure the advanced fax settings, then from the Printer Home, click Fax > Configure the
advanced fax settings. This launches the Printer Setup Utility.
Using the Printer Settings in Macintosh
1
From the Applications folder in the Finder, or from the Finder desktop, double-click the printer folder.
2
Double-click Printer Settings.
3
Configure the fax settings using the printer software.
To view the help information for the fax software, click Help or
You can
•
Set the printer to print incoming faxes on both sides of the paper.
•
Set your fax name and fax number.
•
Adjust the dialing volume.
•
Set the dial method, redial time, number of redial attempts,
dialing prefix, and fax sending speed.
•
Convert sent faxes into modes that receiving fax machines
recognize. Otherwise, such faxes are aborted.
•
Enable error correction during transmission.
Block unwanted incoming faxes.
.
to wake up the printer.
83
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
