Checking the backup battery
Do the following:
1. Power off the computer, and unplug the AC adapter from it.
2. Turn the computer upside down.
3. Remove the battery pack (see "1010 Battery pack" on page 88).
4. Remove the backup battery (see "1090 Backup battery" on page 103).
5. Measure the voltage of the backup battery. See the following figure.
v If the voltage is correct, replace the system board.
v If the voltage is not correct, replace the backup battery.
v If the backup battery discharges quickly after replacement, replace the system
54
ThinkPad W700 and W700ds Hardware Maintenance Manual
Red (+)
Black (-)
board.
Wire
Voltage (V dc)
Red
+2.5 to +3.2
Black
Ground