Instruction On Setting Up; Setting Up; Making The Appliance Level - AEG COMPETENCE 61016VI Installation And Operating Instructions Manual

Free standing electric cooker

Hide thumbs Also See for COMPETENCE 61016VI:

Table of Contents

Instruction on setting up

Important! The new appliance may only be installed and connected by

qualified personnel.

Please observe this instruction, otherwise the warranty will not cover

any damage that may occur.

• In the units or furniture surrounding the appliance, veneers or plastic

coatings must have been made up using heat-resistant bonding

agents (100°C). If plastic coatings or cements are not sufficiently

heat-resistant, the coating may be deformed or loosened.

• The appliance may be installed up against tall units or walls on one

side only.

• The distance between the cooking surface and the cooker hood must

as a minimum be as great as that indicated in the installation instruc-

tions for the cooker hood.

• If the appliance is being placed on a base, measures must be taken to

prevent the appliance from sliding off the base.

Underneath the appliance there are

4 adjustable feet, which can be used

to even out small unlevelnesses in

the floor.

1. Remove the pan drawer.

2. Turn the adjustable feet to make

them higher or lower as required,

until the cooker is standing level.

3. Re-insert the pan drawer.

The adjustable feet are easier to

turn, if the cooker is tilted slightly

to take the weight off the foot.

Table of Contents

Competence 41056vi