Related Manuals for Epson A881371
Summary of Contents for Epson A881371
-
Page 1: Color Monitor
14” Super VGA Color Monitor (Models A881381, A881389, and A881371) User’s Guide (for models A881381 and A881389) - Page 2 This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
- Page 3 Epson America makes no representations or warranties, either express or implied, by or with respect to anything in this manual, and shall not be liable for any implied warranties of merchantability and fitness for a particular purpose or for any indirect, special, or consequential damages.
-
Page 4: Important Safety Instructions
Important Safety Instructions Although this monitor is designed to assure your safety, improper use can cause electric shock or fire hazard. In order not to defeat the safeguards incorporated in the monitor, observe the following safety instructions: Read all of these instructions and save them for later reference. Follow all warnings and instructions in this manual and marked on the monitor. - Page 5 14. Do not allow anything to rest on the power cord. Do not place a cord where it may be stepped on. 15. Do not replace the video interface cable with a non-shielded cable. 16. Unplug the monitor from the computer and the wall outlet before cleaning.
- Page 6 Importantes mesures de sécurité Bien que le moniteur soit conçu pour assurer votre sécurité, un usage incorrect peut provoquer une décharge électrique ou poser un risque d’incendie. Pour ne pas aller à l’encontre des mesures de protection incorporées dans le moniteur, veuillez bien observer ces instructions: Lire attentivement les instructions qui suivent Les conserver en lieu sûr.
- Page 7 13. Faire attention à ne pas abîmer le cordon électrique ni la prise de courant. 14. Ne rien mettre ni laisser sur les cordons électriques. Pour éviter de leur marcher dessus, ne pas les installer dâns un endrôit de passage. 15.
-
Page 8: Table Of Contents
Contents ....... Introduction Energy Star Compliant ..... . . 1 WheretoGetHelp CompuServe On-line Support . -
Page 9: Introduction
If your computer is Energy Star compliant, the EPSON Super VGA Color Monitor automatically enters a low-power, standby mode when the computer stops sending certain signals to the monitor. The power indicator at the front right of the monitor turns amber when the monitor is in this low-power state. -
Page 10: Wheretogethelp
EPSON representative at the nearest marketing location for support and service. International marketing locations are listed at the back of this manual. If you purchased your monitor in the United States, EPSON provides the following support services through the EPSON Connection... -
Page 11: Compuserve On-Line Support
You can reach the EPSON Connection at (800) 922-8911, or call (310) 782-0770 and ask for the EPSON Connection. ® CompuServe On-line Support The fastest way to access helpful tips, specifications, and bulletins is through the Epson America Forum on CompuServe. -
Page 12: Unpacking The Monitor
Tilt and swivel base Warranty card Registration card. If anything is missing or damaged, contact your EPSON representative immediately. Be sure to keep the monitor’s original box and packing materials in case you need to transport the monitor later. -
Page 13: Attaching The Tilt And Swivel Base
Attaching the Tilt and Swivel Base Before you attach the tilt and swivel base, cover your work area with a blanket or foam pad to avoid scratching the monitor during assembly. Then follow these steps: Carefully set the monitor face down on the padding so the bottom of the monitor is facing you. - Page 14 3. Hold the base so the hooks are turned down and position the base next to the bottom of the monitor. 4. Insert the hooks into the slots on the monitor. 5. Slide the base toward the front of the monitor until the latch clicks into the locked position.
-
Page 15: Selecting A Location For The Monitor
Selecting a Location for the Monitor Follow these guidelines when you select a location for the monitor: Read the safety instructions at the beginning of this manual. Use a large, sturdy desk that can support the weight of the computer, monitor, and any peripheral devices. The desk should also provide ample space to hold your equipment and work materials. - Page 16 Follow these steps to connect the monitor to your computer: 1. Make sure the monitor, computer, and any peripheral devices are turned off. 2. Turn the monitor around so the back of the monitor is facing you. 3. Plug the video interface cable into the VGA connector shown below.
-
Page 17: Turning On The Monitor
The monitor contains a universal power supply, so you can connect it to any wall outlet supplying between 100 and 240 volts. Turning On the Monitor Turn on the monitor by pressing the power button located at the front right of the monitor. Then turn on the computer. After a few seconds, an image appears on the screen. - Page 18 Adjusting the Monitor Controls The controls on the front of the monitor allow you to adjust the display to suit your preferences. The following table summarizes the functions of the monitor’s controls. Control Vertical center Vertical size Horizontal center Horizontal size Contrast Brightness Power button...
-
Page 19: Cleaning The Monitor
Cleaning the Monitor To keep the monitor operating at its best, it is important to clean it regularly. Follow these steps: 1. Turn off the monitor and unplug the power cord from the wall outlet. Also disconnect the video interface cable from the computer. - Page 20 3. The electrical outlet might be dead. Test the outlet by plugging in a lamp or other device. The power indicator is on, but there is no image on the screen. Make sure the computer is turned on. Make sure the video interface cable is properly connected to the monitor and the video interface on the computer.
-
Page 21: Specifications
Dot pitch Surface Misconvergence Video and Synchronization Signals Video bandwidth Signal cable A881381, A881389, and A881371 14 inches (356 mm) diagonal 1024 x 768 9.6 x 7 inches (245 x 180 mm) 90° 0.28 mm (A881381 and A881389) 0.39 mm (A881371) Non-glare (A881381 and A881389) 0.35/0.5 mm (A881381 and A881389) -
Page 22: Physical Characteristics
Physical Characteristics Weight Width Height Depth 22.9 lb (10.4 Kg) 14.2 inches (361 mm) 15.2 inches (386 mm) 13.8 inches (351 mm) 14” Super VGA Color Monitor... - Page 23 Tel: (562) 232-8966 Fax: (562) 233-3197 Epson Costa Rica, S.A. San Jose, Costa Rica Tel: (506) 34-6666 Fax: (506) 25-5709 Epson Mexico, S.A. De C.V. Mexico, D.F., Mexico Tel: (525) 395-9897 Fax: (525) 395-9499 Epson Do Brasil São Paulo, SP Brazil...
- Page 24 Epson International Marketing Locations Epson Deutschland GmbH Zülpicher Straße 6, 4000 Düsseldorf 11 Germany Phone: 21l-56030 Telex: 41-8584786 Epson Iberica, S.A. Avda. de Roma 18-26 08290 Cerdanyola del valles 08036 Barcelona, Spain Phone: 3-582-15-00 Fax: 3-582-15-55 Telex: 50129 Epson Hong Kong Ltd.
- Page 25 Distributors South America SISCO São Paulo, SP Brazil Tel: (5511) 574-8877 Fax: (5511) 572-1306 Exhibit Computer Bogota, Colombia Tel: (57l) 218-2700 Fax: (571) 218-5370 UPEN Computer Systems Bogota, Colombia Tel: (571) 257-7800 Ace Computers & Electronics Georgetown, Guyana Tel: (592) 25-65-48 Fax: (592) 26-39-67 Alvimer S.R.L.
- Page 26 Caribbean Caribbean Computer Systems, Ltd. Bridgetown, Barbados Tel: (809) 429-7050 Fax: (809) 427-6089 North Atlantic Data Systems Hamilton, Bermuda Tel: (809) 295-7111 Fax: (809) 292-3834 Columbus Limited Grand Cayman, West Indies, B.W.I. Tel: (809) 949-8039 Fax: (809) 949-7537 WTG/APTEC Systems Limited Kingston, Jamaica Tel: (809) 929-9250 Fax: (809) 929-8296...