HP StorageWorks P9000 - Disk Arrays Manual page 82
Hp storageworks p9000 remote web console messages (av400-96351, january 2011)
Hide thumbs
Also See for StorageWorks P9000 - Disk Arrays:
- Reference manual (399 pages) ,
- Manual (333 pages) ,
- User manual (322 pages)
Table of Contents
Advertisement
Table 31 Error codes (part code 3005) (continued)
Part
Error
Code
Number
3005
58575
3005
58576
3005
58623
3005
58626
3005
58706
3005
65650
3005
65659
3005
65671
3005
65675
3005
65676
3005
65688
3005
65689
3005
65690
3005
65691
3005
65692
3005
65693
3005
65694
82
Message (part code group 3nnn)
Error Message
An error occurred while connecting to
the subsystem.
A communication time-out error
occurred in the disk subsystem.
The specified operation cannot be
performed, because the Snapshot pair
using the pool volumes to be
maintained is in PSUS status or being
restored.
A Snapshot pair is defined.
An error occurred during SVP
processing.
The specified volume is used as a
System Disk volume.
The specified volume is used as a Thin
Provisioning volume.
The pool volumes associated with the
Thin Provisioning volume is included in
the items to be maintained.
The LDEV to be operated is not included
in the specified parity group.
The association cannot be made
because the pool is in a different CLPR.
A failure occurred while formatting.
A failure occurred while quick
formatting.
The specified volumes contain volumes
that are being quick formatted.
Preparing for quick format.
The specified volumes contain volumes
that quick format cannot be executed.
Quick Format cannot be executed.
There is no System Disk area for Quick
Format, the capacity of the System Disk
is insufficient, or the System Disk is
blocked.
Quick format cannot be executed
because the number of parity groups
being quick formatted has exceeded
the maximum.
Recommended Action
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Resynchronize the pair or release the
pair definition, then retry the operation.
Cancel the pair definition, then retry the
operation.
If this problem persists, please contact
HP Technical Support.
Check the setting of the specified volume.
Check the setting of the specified volume.
Release the association between the pool
volume and the Thin Provisioning volume.
Check the setting and status of the LDEV
in the specified parity group.
Confirm that it is associated with a pool
in the same CLPR.
Cancel the format processing from the
SVP, then retry the formatting processing
again.
Cancel the quick formatting processing
from the SVP, then execute the quick
formatting processing again.
Check the settings and retry the
operation.
Check the status and wait until the status
changes to a status that maintenance is
possible.
Select only the volumes that quick format
can be executed and execute quick
format.
Add the System Disk, or restore the
blocked System Disk then retry Quick
Format.
If this problem persists even though the
system disk is normal and has enough
capacity, please contact HP Technical
Support.
Change the setting or execute the quick
formatting process after the quick format
processing for other parity groups has
completed.
Severity
Level
E
E
W
W
E
W
W
W
W
W
W
W
W
W
W
W
W
Advertisement
Table of Contents
