Outdoor Power - KitchenAid POWER KBPU182VSS Use & Care Manual
Outdoor built-in power burner
Hide thumbs
Also See for POWER KBPU182VSS:
Table of Contents
Advertisement
Available languages
Available languages
OUTDOOR
POWER TMBURNER CARE
IMPORTANT:
Before cleaning, make sure all controls are off and
the Power
TM
burner is cool. Always follow label instructions
on
cleaning products.
For routine cleaning, wash with soap and water using a soft cloth
or sponge. Rinse with clean water and dry at once with a soft,
lint-free cloth to avoid spots and streaks.
Do not use steel wool to clean the Power
TM
burner, as it will
scratch the surface.
To avoid weather damage to finish, use stainless steel Power
TM
burner cover.
STAINLESS STEEL
IMPORTANT: To avoid damage to stainless steel surfaces, do not
use soap-filled scouring pads, abrasive cleaners, Cooktop
Polishing Creme, steel wool, gritty wash cloths or paper towels.
To avoid damage to the finish, cleaners should not contain
chlorine.
Food spills should be cleaned as soon as entire Power
TM
burner
is cool. Spills may cause permanent discoloration.
Cleaning
Method:
•
Rub in direction of grain to avoid scratching
or damaging the
surface.
KitchenAid ® Stainless Steel Cleaner and Polish Part Number
4396920 (not included) or KitchenAid ® Stainless Steel Wipes
Part Number 8212510 (not included):
See "Assistance
or Service" section to order.
•
Liquid detergent or all-purpose
cleaner:
•
Rinse with clean water and dry with soft, lint-free cloth.
•
Vinegar to remove hard water spots.
•
Glass cleaner to remove fingerprints.
EXTERIOR
The quality of this material resists most stains and pitting,
providing that the surface is kept clean, polished and covered.
•
Apply stainless steel polish to all non-cooking
areas before
first use. Reapply after each cleaning to avoid permanent
damage to surface.
•
Cleaning should always be followed by rinsing with clean
warm water.
Wipe the surface completely
dry with a soft cloth.
For tough spots or baked-on grease, use Kitchen and BBQ
Grill Degreaser Part Number 31617, a commercial degreaser
designed for stainless steel.
See "Assistance
or Service" section to order.
INTERIOR
Discoloration
of stainless steel on these parts is to be expected,
due to intense heat from the burners. Always rub in the direction
of the grain. Cleaning should always be followed by rinsing with
clean, warm water.
Cleaning
Method:
•
Liquid detergent or all-purpose
cleaner.
•
Rinse with clean water and dry completely with a soft, lint-
free cloth.
A heavy-duty scrub sponge can be used with mild cleaning
products.
For small, difficult-to-clean
areas, use Kitchen and BBQ Grill
Degreaser Part Number 31617, a commercial degreaser
designed for stainless steel.
See "Assistance
or Service" section to order.
Power
TM
BURNER
CAPS AND GRATE
Cleaning Method:
•
Clean with a brass bristle brush.
•
Wash grate using mild detergent, warm water and degreaser.
•
Rinse with clean water and dry with soft, lint-free cloth.
•
KitchenAid ® Stainless Steel Cleaner and Polish Part Number
4396920 (not included) or KitchenAid ®Stainless Steel Wipes
Part Number 8212510 (not included):
See "Assistance
or Service" section to order.
KNOBS AND FLANGE AREA AROUND
KNOBS
IMPORTANT: To avoid damage to knobs or to flange area around
knobs, do not use steel wool, abrasive cleaners, or oven cleaner.
Do not soak knobs.
Cleaning
Method:
•
Mild detergent, a soft cloth and warm water.
•
Rinse and dry.
CONTROL
PANEL GRAPHICS
IMPORTANT: To avoid damage to control panel graphics, do not
use steel wool, abrasive cleaners or oven cleaner.
Do not spray cleaner directly onto panel.
Cleaning
Method:
•
Clean around the burner labels gently; scrubbing may remove
printing.
•
Mild detergent, soft cloth and warm water.
•
Rinse and dry.
21
Advertisement
Table of Contents
