Dell Networking 7048 Reference Manual page 124
Powerconnect 7000 series systems
Hide thumbs
Also See for Networking 7048:
- Release note (74 pages) ,
- Configuration manual (1270 pages) ,
- Reference manual (17 pages)
Advertisement
Command
show ip igmp-proxy
interface
show ip igmp-proxy groups
show ip igmp-proxy groups
detail
a.
For the meaning of each Mode abbreviation, see
IP Helper/DHCP Relay
Command
bootpdhcprelay
maxhopcount
bootpdhcprelay
minwaittime
clear ip helper statistics
ip dhcp relay information
check
ip dhcp relay information
check-reply
ip dhcp relay information
option
ip dhcp relay information
option-insert
ip helper-address (global
configuration)
Description
Displays a detailed list of the host interface
status parameters.
Displays a table of information about multicast
groups that IGMP Proxy reported.
Displays complete information about multicast
groups that IGMP Proxy has reported.
Mode Types
Description
Configures the maximum allowable relay agent
hops for BootP/DHCP Relay on the system.
Configures the minimum wait time in seconds
for BootP/DHCP Relay on the system.
Resets (to 0) the statistics displayed in show ip
helper statistics.
Enables DHCP Relay to check that the relay
agent information option in forwarded
BOOTREPLY messages is valid.
Enables DHCP Relay to check that the relay
agent information option in forwarded
BOOTREPLY messages is valid.
Enables the circuit ID option and remote agent
ID mode for BootP/DHCP Relay on the system
(also called option 82).
Enables the circuit ID option and remote agent
ID mode for BootP/DHCP Relay on the circuit
ID option and remote agent ID mode for
BootP/DHCP Relay on the interface (also called
option 82).
Configures the relay of certain UDP broadcast
packets received on any interface.
on page 81.
Command Groups
a
Mode
PE
PE
PE
a
Mode
GC
GC
PE
GC
IC
GC
GC
GC
124
- Quick Links:
- Dhcp Snooping
Hide quick links:
Advertisement
Chapters
