AirTeQ Combination Floor Tool
(see fig. 9)
This floor tool has been specially
developed to achieve excellent
cleaning results using low energy. It
has particularly low power consumption
and high suction capability.
Warning: If the suction power of the
AirTeQ Combination Floor Tool
seems too high, reduce the suction
until the tool is easier to move
across the floor (see "Correct use -
adjusting the suction power").
Using the included
accessories (see fig. 10)
The following accessories are included:
Dust brush with natural bristles
For cleaning moldings, decorative or
carved items, etc.
The head of the dusting brush can
be swivelled to attain the best
cleaning position.
For dusting particularly delicate
objects.
Upholstery tool
For cleaning upholstery, mattresses,
cushions, curtains, covers, etc.
Crevice nozzle
For cleaning in folds, crevices and
corners.
Accessory clip for the included
accessories (see fig. 11)
Position the accessories as indicated
with the symbols on the accessory
holder.
^ Insert the accessory holder either on
the hand piece at the handle or on
the hose connector of the vacuum
cleaner.
Standard floor brush (see fig. 12)
(depending on model)
^ For safety, when vacuuming stairs it
is best to start at the bottom and
move upwards.
Operation
Power cord
,
Unwind the cord completely to
aid the vacuum in dissipating heat.
Do not pull or carry by the cord, use
the cord as a handle, close a door on
the cord, or pull the cord around
sharp edges or corners. Do not run
the appliance over the cord. Keep
the cord away from heated surfaces.
Do not unplug by pulling the cord.
To unplug grasp the plug, not the
cord.
This appliance is equipped with a
power cord reel. Hold the plug when
rewinding onto cord reel. Do not
allow plug to whip when rewinding.
en
11