Write Managed Object Values; Configure Contact And Location Information Using Snmp - Dell Force10 S4810P Configuration Manual

High-density, 1ru 48-port 10gbe switch

Hide thumbs Also See for Force10 S4810P:

Table of Contents

Figure 46-5. Reading the Value of Many Managed Objects at Once

> snmpwalk -v 2c -c mycommunity 10.11.131.161 .1.3.6.1.2.1.1

SNMPv2-MIB::sysDescr.0 = STRING: Dell Force10 Real Time Operating System Software

Dell Force10 Operating System Version: 1.0

Dell Force10 Application Soft;ware Version: E_MAIN4.7.6.350

Build Time: Mon May 12 14:02:22 PDT 2008

SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.6027.1.3.1

DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (32920954) 3 days, 19:26:49.54

SNMPv2-MIB::sysContact.0 = STRING:

Write Managed Object Values

You may only alter (write) a managed object value if your management station is a member of the same

community as the SNMP agent, and the object is writable.

To write or write-over the value of a managed object:

To write or write-over the value of a

managed object, as shown in

Figure 46-6. Writing over the Current Value of a Managed Object

> snmpset -v 2c -c mycommunity 10.11.131.161 sysName.0 s "R5"

SNMPv2-MIB::sysName.0 = STRING: R5

You may configure system contact and location information from the Dell Force10 system or from the

management station using SNMP.

To configure system contact and location information from the Dell Force10 system:

Identify the system manager along with this person's contact

information (e.g., E-mail address or phone number). You may

use up to 55 characters.

Default: None

Simple Network Management Protocol (SNMP)

snmpset -v version -c community agent-ip

descriptor.instance

identifier.instance |

syntax value

snmp-server contact text

Command Mode

CONFIGURATION