Pick Start Time - Fujitsu M4099D Operator's Manual
Image scanner
Hide thumbs
Also See for M4099D:
- Operator's manual (118 pages) ,
- Reference manual (69 pages) ,
- Brochure & specs (2 pages)
Table of Contents
Advertisement
Pick start time
This function sets the period from when paper is manually put on the hopper to when the pick opera-
tion starts.
LCD display
Pick start time
The following is an example of operation when you use this function.
1.
In <<SETUP MODE>> initial screen, press
.
ENTER
The <<SETUP MODE>> menu screen
(Settings or Paper Length Check) appears.
NOTE
The "Settings" screen does not appear and
the "Paper Length Check" screen first ap-
pears when your scanner is not controlled
through the video or TP interface.
2.
Press
repeatedly until "Pick start time"
appears in the lower line of the menu screen.
3.
Press
.
ENTER
The option select screen appears with the
current setting 01.0S blinking (blinking indi-
cates "changeable").
4.
Press
or
The displayed option changes (00.2S to
29.8S). The value changes in 0.2 seconds.
5.
When the desired value appears, press
to save the change.
ENTER
The LCD returns to the <<SETUP MODE>>
menu screen (Pick start time).
Options
00.2 S to 29.8 S (Default: 01.0 S)
.
Remarks
In units of 0.2 second
<<SETUP MODE>>
<<SETUP MODE>>
Settings
<<SETUP MODE>>
Paper Length Check
<<SETUP MODE>>
Pick start time
Pick start time
01.0 S
Pick start time
05.0 S
<<SETUP MODE>>
Pick start time
6-37
Advertisement
Chapters
Table of Contents
