Table of Contents
Advertisement
Initial settings before operations
1
Press
SRC to enter [STANDBY] mode.
Press the volume knob to enter [FUNCTION] mode.
2
Turn the volume knob to select [INITIAL SET], then press to enter.
3
Turn the volume knob to make a selection, then press to confirm.
4
See table below for selection.
Hold
to finish the procedure.
5
Item
PRESET TYPE NORMAL *: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ AM). ;
MIX: Memorizes one station for each preset button regardless of the selected band (FM1/ FM2/ FM3/ AM).
KEY BEEP
ON */ OFF: Activates/deactivates the keypress tone.
TDF ALARM ON: Activates the alarm if you forgot to detach the faceplate when ACC is set to OFF. ; OFF *: Cancels.
BUILT-IN AUX ON1 *: Outputs sound of the connected external component through the car speakers when "AUX" is selected as the
source. ; ON2: Outputs sound from the connected external component when "AUX" is selected as the source. When
you turn on the power, the sound attenuates (to prevent noise when no external component is connected). Turn the
volume knob clockwise to return to the previous volume level. ; OFF: Disables "AUX" in source selection.
CD READ
1*: Automatically distinguishes between audio file disc and music CD. ; 2: Forces to play as a music CD. No sound can
be heard if an audio file disc is played.
SWITCH
KDC-U549BT only:
PREOUT
REAR */ SUB-W: Selects whether rear speakers or a subwoofer are connected to the line out terminals on the rear of
the unit (through an external amplifier).
SP SELECT
OFF */ 5/4/ 6 × 9/6/ OEM: Selects the speaker size for optimum performance.
F/W UP xx.xx YES: Starts upgrading the firmware. ; NO *: Cancels (upgrading is not activated).
For details on how to update the firmware, see: www.kenwood.com/cs/ce/
Selectable setting (Preset: *)
9
English
Hide quick links:
Advertisement
Table of Contents
