1. Turn off the computer and disconnect all power cords from electrical outlets.
2. Open the computer cover. See "Opening the computer cover" on page 32.
3. Remove the front bezel. See "Removing and reinstalling the front bezel" on page 32.
4. Locate the internal speaker. See "Locating components" on page 12.
5. Disconnect the internal speaker cable from the internal speaker connector on the system board. See
"Locating parts on the system board" on page 12.
6. Remove the cover presence switch (intrusion switch). See "Replacing the cover presence switch"
on page 70.
7. Push the internal speaker outward through the hole
chassis. Then, slide the internal speaker to the right to remove it from the chassis.
Figure 59. Removing the internal speaker
8. Align the new internal speaker with the two metal clips on the chassis, and then slide the speaker
as shown until it snaps into position.
1
to disengage it from the two metal tabs on the
.
Chapter 5
Installing or replacing hardware
73