840163800 ENv03.qxd
To Insert Attachments
Flat Beaters, Straight Wire
Beaters and Whisk
1. Make sure mixer is unplugged and
speed control is set to OFF.
2. Insert a beater or attachment into an
Using Your Mixer
Make sure mixer is unplugged and
1.
speed control is set to 0 (OFF).
Insert beaters.
Plug mixer into electrical outlet.
2.
Place beaters into bowl.
Move the speed control to desired
3.
speed, starting at 1 and increasing to
a higher speed as necessary.
4/10/07
2:51 PM
Page 5
opening on the
bottom of the
mixer. Push
until it clicks
into place.
Repeat with
other beater or
attachment.
Twisted Wire Beaters and Dough
Hooks
1. Insert the wire beater or the dough
Collar
2. Align tabs on the beater or dough
Slot
Tab
When finished mixing, move the
4.
speed control to 0 (OFF) and
unplug mixer.
5. To eject beaters, push straight down
hook with the
collar into the
opening indi-
cated by the
illustration on
the mixer.
hook with the
slots in the
opening. Push
until it clicks
into place.
Repeat with
other beater or
dough hook.
on the eject
button.
5